Honda-SOHC
SOHC.co.uk Forums => Project Board => Topic started by: paul G on January 30, 2018, 12:13:35 PM
-
Another one to the clan CB750 K1 even though I really do not have any room.
Why do we do it (this one is all your fault Trigger ;) ;D)
(https://i.imgur.com/SWwlJUR.jpg)
(https://i.imgur.com/6rRyCM8.jpg)
(https://i.imgur.com/zRw2aIW.jpg)
-
That's sad, it must have been someone's pride and joy at one time, though it is good that you have rescued it.
Cheers
Dennis
-
Does anyone recognise the wheels ;D
-
I have 99p for that UK K1 and I will collect it for that price :) I think that is a very good find ;)
-
I was watching this one on fleabay, nice to see it went to a forum member
-
Fairing and seat unit for sale ;D ;D
-
I would take the K0 reflectors off the fairing before trying to sell it, worth a few bob these days ;)
-
Was alcohol involved? ;)
Having bought a basket case previously I stayed well clear but noticed it popped up in the various CB750 searches I randomly have running on ebay constantly
-
Racing buttons on the gudgeons? has the engine/bike got history?
-
Interesting, looks like a big bore kit on it, looks like the "New" idea in the 70's of Teflon plugs as opposed to circlips in the pistons, maybe it's just the photo though. Not going to be a cheap resto, but I will follow with great interest!
-
I would take the K0 reflectors off the fairing before trying to sell it, worth a few bob these days ;)
Will be doing trig
-
Was alcohol involved? ;)
Having bought a basket case previously I stayed well clear but noticed it popped up in the various CB750 searches I randomly have running on ebay constantly
;D ;D It,s not as bad as my 400/4 was and look at that now :D
-
Racing buttons on the gudgeons? has the engine/bike got history?
Yep UK bike V5 frame/engine both match log book both K1 and been off the road since 1983 :)
-
Another one to the clan CB750 K1 even though I really do not have any room.
Why do we do it (this one is all your fault Trigger ;) ;D)
We all blame Trig for everything, poor old boy ;D ;D ;D
I'm really pleased you ended up with it Paul. Good luck with it, you will have fun restoring it
-
I reckon that’s a decent buy Paul well done. What are your plans for it - concourse restoration?
-
I reckon that’s a decent buy Paul well done. What are your plans for it - concourse restoration?
Hopefull James.
There are a hell of a lot more bits in with it just put those pictures on for a starter.
(https://i.imgur.com/YmrqidO.jpg)
(https://i.imgur.com/pcfbqK4.jpg)
(https://i.imgur.com/zwsjsKd.jpg)
(https://i.imgur.com/gej2uXX.jpg)
(https://i.imgur.com/p3KqYLL.jpg)
(https://i.imgur.com/kycB1OU.jpg)
;D ;D
-
Lot of work Paul but as you have previously proved - doable. Its actually very similar to the way my K2 came but without the fairing and mine where bare crankcases.
Whats the bellmouths like as I'm on the lookout for some for the CR rep - if your not using them
-
Lot of work Paul but as you have previously proved - doable. Its actually very similar to the way my K2 came but without the fairing and mine where bare crankcases.
Whats the bellmouths like as I'm on the lookout for some for the CR rep - if your not using them
Phil I pick it up tomorrow evening hopefully so will let you know then.
-
Lot of work Paul but as you have previously proved - doable. Its actually very similar to the way my K2 came but without the fairing and mine where bare crankcases.
Whats the bellmouths like as I'm on the lookout for some for the CR rep - if your not using them
Phil I pick it up tomorrow evening hopefully so will let you know then.
Thanks Paul
Sent from my Moto G (5) using Tapatalk
-
Was alcohol involved? ;)
Having bought a basket case previously I stayed well clear but noticed it popped up in the various CB750 searches I randomly have running on ebay constantly
;D ;D It,s not as bad as my 400/4 was and look at that now :D
Show us a pic of your 400/4 before and after pics ;)
-
I will see if I can find the picture of it all in the back of a van when I bought it.
-
Another one to the clan CB750 K1 even though I really do not have any room.
Why do we do it (this one is all your fault Trigger ;) ;D)
We all blame Trig for everything, poor old boy ;D ;D ;D
I'm really pleased you ended up with it Paul. Good luck with it, you will have fun restoring it
In this case Julie it's true ;D ;D
-
Looking forward to seeing this come together!
-
Another one to the clan CB750 K1 even though I really do not have any room.
Why do we do it (this one is all your fault Trigger ;) ;D)
We all blame Trig for everything, poor old boy ;D ;D ;D
I'm really pleased you ended up with it Paul. Good luck with it, you will have fun restoring it
In this case Julie it's true ;D ;D
Yes, it is true Paul. Either you or Trig was going to end up with it but, as your need was greater on this occasion, he let you win ;D ;D ;D
-
Another one to the clan CB750 K1 even though I really do not have any room.
Why do we do it (this one is all your fault Trigger ;) ;D)
We all blame Trig for everything, poor old boy ;D ;D ;D
I'm really pleased you ended up with it Paul. Good luck with it, you will have fun restoring it
In this case Julie it's true ;D ;D
Yes, it is true Paul. Either you or Trig was going to end up with it but, as your need was greater on this occasion, he let you win ;D ;D ;D
Was that so he can sell me all the bits I will need.
Tell him I want that .99p brake hose back ;D
-
Another one to the clan CB750 K1 even though I really do not have any room.
Why do we do it (this one is all your fault Trigger ;) ;D)
We all blame Trig for everything, poor old boy ;D ;D ;D
I'm really pleased you ended up with it Paul. Good luck with it, you will have fun restoring it
In this case Julie it's true ;D ;D
Yes, it is true Paul. Either you or Trig was going to end up with it but, as your need was greater on this occasion, he let you win ;D ;D ;D
Tell him I want that .99p brake hose back ;D
I will tell him but what with inflation, storage charges and interest, It's now £32.99 but you can buy it back if you wish ;D ;D ;D
-
Does anyone recognise the wheels ;D
Still can't find out what those wheels are, any other members have any idea ?
Any markings on them Paul.
-
Campbray wheels, 1970's aftermarket wheels made in Britain mostly fitted to Commandos and Bonnevilles
-
(https://static.mijnwebwinkel.nl/winkel/euromotors/image/cache/full/7b125ccc26915c397b6e50ec40a998c7522a3cc2.jpg)
-
And fitted to CB750's.... Click (http://www.ezimport.co.jp/product.php?id=k277409910) if anyone would like to fit a set ££££££ 8)
Personally, if building a nice usable but not concourse bike I would keep them as they are period goodies.
-
And fitted to CB750's.... Click (http://www.ezimport.co.jp/product.php?id=k277409910) if anyone would like to fit a set ££££££ 8)
Personally, if building a nice usable but not concourse bike I would keep them as they are period goodies.
I will be selling them if anyone is interested as the bike is going back stock.
Would rather someone from the forum had them if they are interested otherwise they will be going on flebay
-
And fitted to CB750's.... Click (http://www.ezimport.co.jp/product.php?id=k277409910) if anyone would like to fit a set ££££££ 8)
Personally, if building a nice usable but not concourse bike I would keep them as they are period goodies.
I will be selling them if anyone is interested as the bike is going back stock.
Would rather someone from the forum had them if they are interested otherwise they will be going on flebay
Pm sent Paul
-
I wanted those wheels as my finders fee ;D ;D ;D
-
What do I get for telling you what wheels they are Trig? ;D
And I want commission from Paul for pointing out they are going for nearly a £grand in Japan ;D ;D
-
What do I get for telling you what wheels they are Trig? ;D
And I want commission from Paul for pointing out they are going for nearly a £grand in Japan ;D ;D
I'm not selling them in Japan ;) ;)
-
The shipping costs from Japan are horrendous so selling here you should be able to achieve even more £££££ ;D
-
Lot of work Paul but as you have previously proved - doable. Its actually very similar to the way my K2 came but without the fairing and mine where bare crankcases.
Whats the bellmouths like as I'm on the lookout for some for the CR rep - if your not using them
Phil,
There are only three of them :(
-
they are going for nearly a £grand in Japan
Hells Bells, I used to have one of those wheels, unused, given me by a mate, I used it as a base for a trendy chair! >:(
-
they are going for nearly a £grand in Japan
Hells Bells, I used to have one of those wheels, unused, given me by a mate, I used it as a base for a trendy chair! >:(
;D ;D ;D :'(
-
Lot of work Paul but as you have previously proved - doable. Its actually very similar to the way my K2 came but without the fairing and mine where bare crankcases.
Whats the bellmouths like as I'm on the lookout for some for the CR rep - if your not using them
Phil,
There are only three of them :(
Thanks for looking anyway Paul
-
Well the bike is all stripped and parts ready for powder coating and chroming.
Polished the hubs and started the re-build on the wheels.
Still looking for a set of barrels to get the engine strip and rebuild under way.
(https://i.imgur.com/qdnPzKX.jpg)
(https://i.imgur.com/3aqpl5r.jpg)
-
Does anyone recognise the wheels ;D
I would have said Kreidler RS 8)
http://www.zweitakte.de/modelle/strasse/Kreidler/Kreidler%20Florett%20RS%201978.htm
Good luck ithnthat project!
-
Front wheel done ;D
(https://i.imgur.com/v5l2SLY.jpg)
(https://i.imgur.com/bWFLMgR.jpg)
-
You bought new rims with text on the side.
Could´nt the old ones be saved?
-
You bought new rims with text on the side.
Could´nt the old ones be saved?
No unfortunately beyond repair.
-
Fork legs polished and rebuilt with new seals etc.
(https://i.imgur.com/ekJmEul.jpg)
-
Wheels finished and new boots fitted ;D
(https://i.imgur.com/stma6DI.jpg)
(https://i.imgur.com/4WWb1Ea.jpg)
-
Well done! Those Conti look good.
-
They look nice Paul.
-
Wheels look great I can see I'm going to have to have a go at mine at some point.
I keep putting them off for some reason
-
Wheels look great .....got me thinking about doing my own instead of sending them away somewhere. It sounds complicated with 'offset' measurements etc but the rear wheel looks to be central over the spoked section?
-
Well frame and all other black bits back from powder coating and what a superb job Graham (Trigger) has made of it all in the correct gloss Black. ;D ;D
Just started test fitting some of the bits to ensure everything will go back to gether OK.
(https://i.imgur.com/MVpW9nP.jpg)
(https://i.imgur.com/SbxgiPe.jpg)
(https://i.imgur.com/WkaQb3o.jpg)
(https://i.imgur.com/qrBlLav.jpg)
(https://i.imgur.com/22b3SQd.jpg)
(https://i.imgur.com/GQpnRlu.jpg)
(https://i.imgur.com/zHSk8pV.jpg)
-
👍👍👍👍👍👍
-
Bit of an update as things are moving on.
Lots of bits added to the frame will post some pictures when I get the wheels back on.
Lots of bright bits comming back tomorrow from the BZP platers.
Engine stripped down and all checked.
Cases painted and cured.
(https://i.imgur.com/S3eNq8z.jpg)
(https://i.imgur.com/9TzL750.jpg)
(https://i.imgur.com/C2zIeFZ.jpg)
-
Loads of goodies arriving from Yamiya and Trigger
(https://i.imgur.com/FAHIvGL.jpg)
(https://i.imgur.com/fB6w5zy.jpg)
(https://i.imgur.com/tgEKMiW.jpg)
-
Bottom end rebuild started with all new bits :D
(https://i.imgur.com/kUvHXVm.jpg)
(https://i.imgur.com/4FmvEc6.jpg)
(https://i.imgur.com/AzYPWh2.jpg)
(https://i.imgur.com/569o6qr.jpg)
(https://i.imgur.com/JdocUbX.jpg)
(https://i.imgur.com/YUPpdVE.jpg)
(https://i.imgur.com/pTlWVXv.jpg)
-
Great progress Paul and looking oh so familiar ;D
-
Something is wrong. I have never seen the thread on con rod bolts sticking out that far after being torqued up ;)
-
Something is wrong. I have never seen the thread on con rod bolts sticking out that far after being torqued up ;)
Graham the crank and con rod assembley was a replacement unit from Hadley custom with less than 3k miles on it before the bike was taken off the road.
This was all on the paperwork that I received with the bike and after inspecting it there wasn't a mark on it.
I replaced the shells etc because it was prudent to do so whilst I was in there.
(https://i.imgur.com/uQ4gspk.jpg)
(https://i.imgur.com/mLAbznC.jpg)
-
Never believe everything you read, and the threads should be level with the nuts ;)
-
Never believe everything you read, and the threads should be level with the nuts ;)
What even the delivery note ;)
-
Never believe everything you read, and the threads should be level with the nuts ;)
What even the delivery note ;)
Nothing!
I was in a engineering company a month or so ago. When a guy bought a engine in from his BSA with a bill of full rebuild. He had bought the bike off fleabay and the engine had blown up within 300 miles, and had bought the bike with the understanding that it had just had the engine fully rebuilt.
As i moved to the side of the counter, the owner of the company looked at the bill and said, That is not my headed note paper :o :o
-
Never believe everything you read, and the threads should be level with the nuts ;)
What even the delivery note ;)
Nothing!
I was in a engineering company a month or so ago. When a guy bought a engine in from his BSA with a bill of full rebuild. He had bought the bike off fleabay and the engine had blown up within 300 miles, and had bought the bike with the understanding that it had just had the engine fully rebuilt.
As i moved to the side of the counter, the owner of the company looked at the bill and said, That is not my headed note paper :o :o
WOW!!! Cheeky b*stards!
Sent from my iPhone using Tapatalk
-
Two tubs of blingy bits back from the BZP platers and starting to go back on :D
(https://i.imgur.com/q64mrIv.jpg)
(https://i.imgur.com/1aQLn5E.jpg)
(https://i.imgur.com/F7B58TF.jpg)
(https://i.imgur.com/CZ79EKO.jpg)
(https://i.imgur.com/ozdmYhB.jpg)
(https://i.imgur.com/3VAWI5S.jpg)
(https://i.imgur.com/WreeGMR.jpg)
(https://i.imgur.com/QkzsmvI.jpg)
(https://i.imgur.com/cCksjnO.jpg)
-
Lovely blingy bits Paul. Looking great.
-
Nice work Paul! :) :) :)
-
That looks really sweet and tidy.
One day...maybe..mine will look that pretty. Till then, I shall just convince myself that iron oxide is the new chrome......and sob quietly into my mug of tea.
-
Great looking build ! Well done 👍
-
Bottom end rebuild well on the way :D
(https://i.imgur.com/aHxrtdi.jpg)
(https://i.imgur.com/FtZfNic.jpg)
(https://i.imgur.com/oHfNmWL.jpg)
-
Well done Paul, its looking fantastic. Hopefully you'll get it finsihed and some miles under it before the end of summer.
Why are you photos so crystal clear even close up :o
-
Well done Paul, its looking fantastic. Hopefully you'll get it finsihed and some miles under it before the end of summer.
Why are you photos so crystal clear even close up :o
No idea they are just on my Samsung phone :D
-
Never believe everything you read, and the threads should be level with the nuts ;)
Nice job Paul ! Looking spot on... I notice in the Hadleigh custom sheet it says 'Big ends only ground'...does that mean they reground the crank and fitted non-standard, undersize bearing shells/modified the con rods in some way? If so, it may explain the bolts protruding slightly more than normal.
-
Never believe everything you read, and the threads should be level with the nuts ;)
Nice job Paul ! Looking spot on... I notice in the Hadleigh custom sheet it says 'Big ends only ground'...does that mean they reground the crank and fitted non-standard, undersize bearing shells? If so, it may explain the bolts protruding slightly more than normal.
Ash,
No there are four sets of green shells and one Yellow.
The rods that have been fitted are also not OEM ones they are uprated ones as the bike was also fitted with a Henry Abe 900cc big bore kit.
-
Well done Paul, its looking fantastic. Hopefully you'll get it finsihed and some miles under it before the end of summer.
Why are you photos so crystal clear even close up :o
They use a really aggressive sharpening strategy in small digital imaging chips to make the end result "appear" sharper than its resolution will allow. It makes everything look sharper at small final image size but if you zoom in it shows loss of details. In effect a digital trick to maximise the small form of the originating device. All controlled by an algorithm string/sequence.
-
Looks good though. 8)
-
Seem to have a bolt missing from the back of the cases and that doesn't look to be a 80mm M6 just past the out put shaft ;D ;D ;D
-
I didn't put that bolt in yet Graham as I am looking for the overflow guide ;)
Well spotted i knew you had xray vission ;) ;D
-
Clutch re-built and rotor fitted with reduction gear and new set washer.
(https://i.imgur.com/qTlntJP.jpg)
(https://i.imgur.com/kzQySRM.jpg)
(https://i.imgur.com/D5IzvXy.jpg)
(https://i.imgur.com/fKfjAJD.jpg)
(https://i.imgur.com/O3kwiMD.jpg)
-
Don't think yours had a overflow plate. Fitted to later engines ;)
-
Making great progress Paul, on the road by the weekend ?😆😆😆
-
Making great progress Paul, on the road by the weekend ?😆😆😆
I wish ;) How long does Meno take for the painting just wondering when to get them sent off too him.
-
Don't think yours had a overflow plate. Fitted to later engines ;)
Showing one on the parts list.
(https://i.imgur.com/l5NC7Eo.jpg)
-
Making great progress Paul, on the road by the weekend ?😆😆😆
I wish ;) How long does Meno take for the painting just wondering when to get them sent off too him.
ASAP if I were you Paul. Depending on the work you need done on the tank it could take quite a few months.
-
Making great progress Paul, on the road by the weekend ?😆😆😆
I wish ;) How long does Meno take for the painting just wondering when to get them sent off too him.
ASAP if I were you Paul. Depending on the work you need done on the tank it could take quite a few months.
I will message him :D
-
Don't think yours had a overflow plate. Fitted to later engines ;)
Showing one on the parts list.
(https://i.imgur.com/l5NC7Eo.jpg)
As you can see from your parts list, it is wrong. No, number 1 against the K2 and that is when it was introduced in the UK ;)
-
Don't think yours had a overflow plate. Fitted to later engines ;)
Showing one on the parts list.
(https://i.imgur.com/l5NC7Eo.jpg)
Ok thought it did as it shows a 1 under the K1 column
As you can see from your parts list, it is wrong. No, number 1 against the K2 and that is when it was introduced in the UK ;)
-
Don't think yours had a overflow plate. Fitted to later engines ;)
Looks like it depends on the engine number as it shows a 'from' number in the RH column.
-
Don't think yours had a overflow plate. Fitted to later engines ;)
Looks like it depends on the engine number as it shows a 'from' number in the RH column.
Ash mine starts 1102
-
Oil filter housing repair.
Bit more shaping and finishing with a fine stone and it will be ready for painting ;D ;D
(https://i.imgur.com/FgIWYsg.jpg)
(https://i.imgur.com/vQeK6Sq.jpg)
(https://i.imgur.com/k7ugRHj.jpg)
(https://i.imgur.com/3Pjp5FH.jpg)
(https://i.imgur.com/Lw2ds9C.jpg)
-
Oil filter housing and sump plate painted and now baking at a nice 190 degC :D
(https://i.imgur.com/yq4BRxr.jpg)
(https://i.imgur.com/1f8vFGD.jpg)
-
More new bits arriving ;D
(https://i.imgur.com/JjCmouB.jpg)
(https://i.imgur.com/UW8KXe0.jpg)
(https://i.imgur.com/gYzEN0z.jpg)
(https://i.imgur.com/f5bzsVl.jpg)
(https://i.imgur.com/qBHXb7h.jpg)
Also managed to get some of the casings polished and well pleased.
Not looking forward to the cam cover though :o
(https://i.imgur.com/j8TUX6n.jpg)
(https://i.imgur.com/zc8xAJo.jpg)
(https://i.imgur.com/7393Fa5.jpg)
(https://i.imgur.com/phfy2Pg.jpg)
-
Blimey, need my shades on to look at that 😎😎😎
-
Blimey, need my shades on to look at that 😎😎😎
You should have seen the colour of me Julie >:( >:(
-
Blimey, need my shades on to look at that 😎😎😎
You should have seen the colour of me Julie >:( >:(
I can well imagine Paul. When trig has been polishing he comes in looking like he's been down a coal mine. Even with all the goggles / resperstors on, he seems to end up with black eyeliner which takes days to disappear. He doesn't really like polishing and saves it all up and does it for 8 hours at a time !!
-
It's coming on nicely Paul, if i may ask, where did you get your stainless spokes from ?
Adrian.
-
It's coming on nicely Paul, if i may ask, where did you get your stainless spokes from ?
Adrian.
Here Adrian
https://www.central-wheel.co.uk/
-
That is a proper shine :)
Do you clear coat it to keep it like that, or just accept the need for shares in Solvol to keep it looking nice?
I think my choice of a black engined variant is down to my dislike of polishing! It looks so good when it's fresh......
-
Paul - you must have the patients of a saint!
-
Paul - you must have the patients of a saint!
;D ;D The wife would not agree with you Phil.
-
Paul - you must have the patients of a saint!
;D ;D The wife would not agree with you Phil.
Neither would I ;D ;D ;D
-
Paul - you must have the patients of a saint!
;D ;D The wife would not agree with you Phil.
Neither would I ;D ;D ;D
What do you mean ;D Are my barrels and head done yet ;) ;D
-
Paul - you must have the patients of a saint!
;D ;D The wife would not agree with you Phil.
Neither would I ;D ;D ;D
What do you mean ;D Are my barrels and head done yet ;) ;D
I am sure i had your wife in my workshop with a rolling pin, advising me not to do anymore work until she has had her holiday ;D ;D ;D ;D
-
Paul - you must have the patients of a saint!
;D ;D The wife would not agree with you Phil.
Neither would I ;D ;D ;D
What do you mean ;D Are my barrels and head done yet ;) ;D
I am sure i had your wife in my workshop with a rolling pin, advising me not to do anymore work until she has had her holiday ;D ;D ;D ;D
As someone once said, if anything happens to me please god don't let my wife sell the bikes for what I told her they cost me😄😄
-
How the hell did u get those cases that shines?? No matter how hard I try I can’t seem to get them like that??
Alan
-
How the hell did u get those cases that shines?? No matter how hard I try I can’t seem to get them like that??
Alan
Alan,
I have a great teacher looking over my shoulder at everything I do on this and if it is not right is not backward at comming forward ;) ;) ;D
He may own up to being this person but his help/advice is invaluable.
-
How the hell did u get those cases that shines?? No matter how hard I try I can’t seem to get them like that??
Alan
Alan,
I have a great teacher looking over my shoulder at everything I do on this and if it is not right is not backward at comming forward ;) ;) ;D
He may own up to being this person but his help/advice is invaluble.
Are you talking about the Honda God at the House of Honda Paul? 😁😁😁😁😁 Hopefully you are now beginning to realise what I went through when I built my engine, I have still not recovered fully.
😭😭😭
-
How the hell did u get those cases that shines?? No matter how hard I try I can’t seem to get them like that??
Alan
Alan,
I have a great teacher looking over my shoulder at everything I do on this and if it is not right is not backward at comming forward ;) ;) ;D
He may own up to being this person but his help/advice is invaluble.
Are you talking about the Honda God at the House of Honda Paul? 😁😁😁😁😁 Hopefully you are now beginning to realise what I went through when I built my engine, I have still not recovered fully.
😭😭😭
;D ;D ;D ;D there is no emoji available for what I wanted to put good job you don't have a gun ;) ;) bless him
-
Got some more blingy bits back from the BZP platers at lunch (note to self make sure next time you send everything as it costs more :-[)
Just for anyone local to me John Street platers in Sheffield, took the bits in Monday got them back today top job.
-
I think we both need a holiday Julie 8) oh wait a minute I have one in two weeks.
-
How the hell did u get those cases that shines?? No matter how hard I try I can’t seem to get them like that??
Alan
Alan,
I have a great teacher looking over my shoulder at everything I do on this and if it is not right is not backward at comming forward ;) ;) ;D
He may own up to being this person but his help/advice is invaluble.
Are you talking about the Honda God at the House of Honda Paul? 😁😁😁😁😁 Hopefully you are now beginning to realise what I went through when I built my engine, I have still not recovered fully.
😭😭😭
;D ;D ;D ;D there is no emoji available for what I wanted to put good job you don't have a gun ;) ;) bless him
Ah yes, bless him 😰😰😰 It's very difficult for the likes of you and me Paul to remember everything that need re plating or powder coating. There is always something that gets left behind for 'next time'.
-
I think we both need a holiday Julie 8) oh wait a minute I have one in two weeks.
Lucky git....oh wait, I'm going darn sarf for a few days end of next week......my regular respite trip 😁😁😁😁😁
-
Ha, i have just looked up the dictionary meaning of 'respite'
respite
ˈrɛspʌɪt,ˈrɛspɪt/Submit
noun
1.a short period of rest or relief from something difficult or unpleasant.
Honestly, Trig is not that bad ;D ;D ;D ;D
-
Ha, i have just looked up the dictionary meaning of 'respite'
respite
ˈrɛspʌɪt,ˈrɛspɪt/Submit
noun
1.a short period of rest or relief from something difficult or unpleasant.
Honestly, Trig is not that bad ;D ;D ;D ;D
Have you looked at you Avatar recently.
You know we are both going to pay for this one way or another :( :(
-
Ha, i have just looked up the dictionary meaning of 'respite'
respite
ˈrɛspʌɪt,ˈrɛspɪt/Submit
noun
1.a short period of rest or relief from something difficult or unpleasant.
Honestly, Trig is not that bad ;D ;D ;D ;D
Have you looked at you Avatar recently.
You know we are both going to pay for this one way or another :( :(
Yep, i'm prepared ;D ;D ;D ;D ;D
I must not jest, he is a good old chap, he will do anything for anyone and help anyone out if he can......he is just miss understood :'( :'( :'( :'(
-
Front foot rests re-built and what a pair look better than new ;D ;D
(https://i.imgur.com/DpSOqip.jpg)
(https://i.imgur.com/qIIWttB.jpg)
(https://i.imgur.com/rTp0LVy.jpg)
-
👍👍👍
-
Those look so nice. .... getting all the little springs, washers and such plated and looking good as new just makes such a difference.
-
They look great, it feels great to do something like that.
Cheers
Dennis
-
Cheers guys and girls :D
-
Fantastic progress Paul and all coming together nicely.
Interesting you mention John Street Platers, as that's the firm that a friend of mine has used for many, many years.
The place I always use took 5 weeks to do the plating below and he told me on Wednesday that if I give him some more it will be at least 4 weeks (he told me 3 weeks last time - 5 weeks in reality). Can you share prices please ? As an example this stuff cost £65 (paid him in readies).
-
Fantastic progress Paul and all coming together nicely.
Interesting you mention John Street Platers, as that's the firm that a friend of mine has used for many, many years.
The place I always use took 5 weeks to do the plating below and he told me on Wednesday that if I give him some more it will be at least 4 weeks (he told me 3 weeks last time - 5 weeks in reality). Can you share prices please ? As an example this stuff cost £65 (paid him in readies).
Blimey Ash, I would be happy to pay £65 for that lot. Did you have to do any prep work yourself. If not, that's cheap as chips.
-
I thought the guy I use is cheap but I doubt if he could better £65 for all that! I would be tempted to stick with him Ash and maybe pay him an extra tenner to knock a week or two off the timescales.
-
I thought the guy I use is cheap but I doubt if he could better £65 for all that! I would be tempted to stick with him Ash and maybe pay him an extra tenner to knock a week or two off the timescales.
Well he likes me because I solvent degrease, then use my alkaline 'Witches Brew' (described in full on here) to remove the old zinc plate then I dry bead blast with 0/44 glass beads. Even though I am a tight Yorkshireman it's not the price it's the lead time that is stretching out. It used to be 2 weeks. Last time I gave him twice as much as that and it was £80 !! Problem is, if you are short of an odd bit 5 weeks is too long to wait. Guess I should get my old home plating rig out for the odd bits I need in a hurry. I tried to get him to sell me a couple of litres of plating electrolyte but he said that he couldn't due to H&S reasons.
-
I had a feeling he was only doing the plating at that price. Stick with him he's cheap. I had the linkages for a 750F2 carb set done at Lancaster Bronze that cost me £30 and I had to wait 9 weeks for them to post back as agreed. That never happened so it was a 65 mile round trip to go and get them. They won't be getting any more work off me.
-
Ash pricing Hmmm
I have been twice now and bartered with them on both occations.
If you just turn up it is a cash job don't know on how it goes if its sent in and booked in.
First lot was took in Monday and I collected Friday.
The second job I took in Monday and picked it up Wednesday.
Looking at what you have in that tub I would say through the door cheaper !! ;D
-
Got a couple more bits polished at the weekend
(https://i.imgur.com/RcxrxlC.jpg)
(https://i.imgur.com/dSky7ts.jpg)
(https://i.imgur.com/4Jdm5rG.jpg)
(https://i.imgur.com/xqHMLYI.jpg)
Now for this bugger :( :'( will let you know how it goes
(https://i.imgur.com/SiIWni6.jpg)
-
Some more blingy bits back this time from the chrome platers 8) 8)
(https://i.imgur.com/Of65SWb.jpg)
(https://i.imgur.com/1kNptsp.jpg)
(https://i.imgur.com/r2k7WHJ.jpg)
Thanks to Prestige plating
-
Also made a start on polishing the cam cover >:(
(https://i.imgur.com/UQcgXdq.jpg)
(https://i.imgur.com/qH3iZFj.jpg)
(https://i.imgur.com/3oPOT0z.jpg)
-
Some more blingy bits back this time from the chrome platers 8) 8)
(https://i.imgur.com/Of65SWb.jpg)
(https://i.imgur.com/1kNptsp.jpg)
(https://i.imgur.com/r2k7WHJ.jpg)
Thanks to Prestige plating
Now that is proper chrome Paul! What sort of cost was that lot if you don't mind me asking?
-
Phil,
£140 at Prestiege plating in Mexbrough.
They always do a top job but not quick. no prep needed just drop them off and pick them back up 8)
-
Thats a good price for that quality Paul - especially with no prep
-
Top end back from Graham and top work it is again.
The engine rebuild can now be compleated ;D ;D ;D
(https://i.imgur.com/uwKkPl6.jpg)
(https://i.imgur.com/6peUnXv.jpg)
(https://i.imgur.com/FPM6PjJ.jpg)
(https://i.imgur.com/VJH3pDE.jpg)
On it's wheels for the first time ready to be stripped back down to fit the engine.
(https://i.imgur.com/crihsQd.jpg)
-
Should be running by tea time ;D ;D
-
Should be running by tea time ;D ;D
Unfortunately work get's in the way. But it pays for the bills ;)
-
It'll never run right with the number 3 written at 90 degrees to the numbers on the other pistons. My OCD whacked me around the head when I saw that.
Seriously though, great quality work. Will you use the Vesrah head gasket, or get a genuine Honda one? I did, on advice from here, it cost twice what the whole complete gasket set cost (from CSM), but was a sticky finish, and doesn't leak.
-
It'll never run right with the number 3 written at 90 degrees to the numbers on the other pistons. My OCD whacked me around the head when I saw that.
Seriously though, great quality work. Will you use the Vesrah head gasket, or get a genuine Honda one? I did, on advice from here, it cost twice what the whole complete gasket set cost (from CSM), but was a sticky finish, and doesn't leak.
Not really thought about it yet :o
-
Managed to get the barrels on and the cam cover polished.
Just waiting for a couple of parts and then hopefully the head on and the engine into the frame.
(https://i.imgur.com/9Fz62wk.jpg)
(https://i.imgur.com/bi54Yf3.jpg)
(https://i.imgur.com/6MitNIp.jpg)
(https://i.imgur.com/h57TJwz.jpg)
-
Managed to get the head on last night and gave it the first torque down will re torque it tonight :)
(https://i.imgur.com/pg7zvnv.jpg)
(https://i.imgur.com/S4SwCkO.jpg)
(https://i.imgur.com/MsX57Wk.jpg)
-
Looking great Paul,it will look even better with all the 'O' rings in place 😀😀😀😀
-
Looking great Paul,it will look even better with all the 'O' rings in place 😀😀😀😀
Ha ha i'm feeling the wrath of too many questions to Graham ;) ;) In my defence I didn't strip the engine/bike down and the manuals are as Graham said burn them to keep warm.
Has he chilled out now ;D ;D
-
Looking great Paul,it will look even better with all the 'O' rings in place 😀😀😀😀
Ha ha i'm feeling the wrath of too many questions to Graham ;) ;) In my defence I didn't strip the engine/bike down and the manuals are as Graham said burn them to keep warm.
Has he chilled out now ;D ;D
Yes Paul, he's playing with his own 'O' rings now so all calm again 😀😀😀😀
-
Looking great Paul,it will look even better with all the 'O' rings in place 😀😀😀😀
Ha ha i'm feeling the wrath of too many questions to Graham ;) ;) In my defence I didn't strip the engine/bike down and the manuals are as Graham said burn them to keep warm.
Has he chilled out now ;D ;D
Yes Paul, he's playing with his own 'O' rings now so all calm again 😀😀😀😀
Are they the Orings he put in my box ;D ;)
-
Looking great Paul,it will look even better with all the 'O' rings in place 😀😀😀😀
Ha ha i'm feeling the wrath of too many questions to Graham ;) ;) In my defence I didn't strip the engine/bike down and the manuals are as Graham said burn them to keep warm.
Has he chilled out now ;D ;D
Yes Paul, he's playing with his own 'O' rings now so all calm again 😀😀😀😀
Are they the Orings he put in my box ;D ;)
Well, someone put them in your box ;D ;D He had me hunting high and low for them. I couldn't believe he didn't have any more in stock until he said they were the square 'O' rings and you had ended up with the whole bag of them ::) ::) ::)
-
Cam in and timed up, all rocker assemblies installed.
Just need to get the cam cover installed and it can go back in the frame ;D ;D
(https://i.imgur.com/QnUpE7r.jpg)
(https://i.imgur.com/EEG2x0Q.jpg)
(https://i.imgur.com/4vX8X90.jpg)
(https://i.imgur.com/81EYbDZ.jpg)
-
I want my engine looking that clean and shiny :)
-
Come on Paul, you have had that bike near on a year now ;D ;D ;D
-
Come on Paul, you have had that bike near on a year now ;D ;D ;D
9 months actually and have you any idea what these engines cost ;D ;D ;) ;) ;)
There has been a milestone this week as it has gone from this
(https://i.imgur.com/KT2eOUC.jpg)
(https://i.imgur.com/l1IY0xG.jpg)
TO THIS ;D ;D
(https://i.imgur.com/KFrAT8S.jpg)
(https://i.imgur.com/qFm8X2p.jpg)
Carbs have also been stripped and cleaned, carb kit arrived and all bits back from BZP plating 8)
(https://i.imgur.com/nehvh19.jpg)
(https://i.imgur.com/HVHY2JO.jpg)
-
Looks a little different from 9 months ago ;)
That is coming along very well and it will be great to see another SOHC on the road.
-
Looking great Paul.....well done.
-
Coming along very nicely Paul
Sent from my iPhone using Tapatalk Pro
-
Looking great Paul.....well done.
Thanks Julie :)
-
Coming along very nicely Paul
Sent from my iPhone using Tapatalk Pro
Cheers James, any spare choke slides ;)
-
More new bits arrived carb rubbers and clamps and the rubber dust caps.
Carbs now fully refurbished ;D ;D
(https://i.imgur.com/u26xrL1.jpg)
(https://i.imgur.com/ulMlyBR.jpg)
(https://i.imgur.com/arkiwYH.jpg)
(https://i.imgur.com/RS7OhIv.jpg)
(https://i.imgur.com/3X4hIlP.jpg)
-
Paul - really don’t want to ‘piss on your fire’ as you’re doing a super job, but it looks like you’re using the reproduction/non-genuine intake rubbers / clamps from DSS.
Just keep a close eye on them as I have two previous attempts using them, both resulting in chasing air leaks due to poor sealing/manufacturing tolerances. This was after 6 months of light use. Same with the repro fork gaiters, which develop hairline cracks/degraded after 6 months.
I’m not knocking DSS - they do a good job at helping us restore these bikes/keep them on the road, but worth noting where to tread carefully..
Take the above as you will - just wanted to share my thoughts..
Sent from my iPhone using Tapatalk Pro
-
James,
Not an issue all info greatly received.
They are not repro ones and they wasn't from silvers either James.
I got the originals from a company in Germany you can see the bags for the clamps and dust rubbers in one of the pictures.
I will keep an eye on them all the same as I did have an issue with some for the 400/4 from the said company;) ;)
-
Hi all managed to get the carbs on and all the plumbing done. ;D
(https://i.imgur.com/IhtkF2a.jpg)
(https://i.imgur.com/zKozqoB.jpg)
(https://i.imgur.com/5T0UtrK.jpg)
-
Why are the outside carbs more blingy than the inside two ;D ;D
-
I used genuine honda inlet rubbers on my rebuild and i suffered from airleaks. Had to modify the clamps to ensure they put sufficient compression on the rubbers...clamps were gen honda too.. Not an uncommon problem either. Nice looking build by the way 8) good work!
-
Why are the outside carbs more blingy than the inside two ;D ;D
They aren't Graham just the camera flash ;D ;D
-
I used genuine honda inlet rubbers on my rebuild and i suffered from airleaks. Had to modify the clamps to ensure they put sufficient compression on the rubbers...clamps were gen honda too.. Not an uncommon problem either. Nice looking build by the way 8) good work!
Cheers Rob
-
Hi all managed to get the carbs on and all the plumbing done. ;D
(https://i.imgur.com/IhtkF2a.jpg)
(https://i.imgur.com/zKozqoB.jpg)
(https://i.imgur.com/5T0UtrK.jpg)
Looking good Paul
-
Cheers Phil.
-
Air box fitted ;D
(https://i.imgur.com/t4GgLJl.jpg)
(https://i.imgur.com/cJt8k9d.jpg)
-
Some more goodies arrived and should keep me busy at the weekend ;D
(https://i.imgur.com/JPo32uc.jpg)
-
Made a start on refurbishing the switches, if they come out as good as the Z650 ones I will be happy as they were mint 8)
Quite enjoy doing these. :o
(https://i.imgur.com/XF7mRpG.jpg)
(https://i.imgur.com/voNrjt2.jpg)
(https://i.imgur.com/zNUtZZw.jpg)
(https://i.imgur.com/pzu8YYm.jpg)
(https://i.imgur.com/ddpCDUu.jpg)
(https://i.imgur.com/dA5LRPr.jpg)
(https://i.imgur.com/1O6aWvL.jpg)
-
It's the next part i want to see, how are you going to paint the red letters ? a job that i baulk at. By the way your doing a great job.
-
It's the next part i want to see, how are you going to paint the red letters ? a job that i baulk at. By the way your doing a great job.
Doing it tonight so will post tomorrow.
It is really simple ;D ;D
-
Great progress Paul
-
My Z650 ones
(https://i.imgur.com/1h0kKzI.jpg)
-
Great progress Paul
Thanks :) :)
-
Great progress Paul
Thanks :) :)
There you go switches painted now for the rebuild (https://uploads.tapatalk-cdn.com/20190105/056391018ae44ce87eb9f53cc82b5834.jpg)
Sent from my SM-J330FN using Tapatalk
-
Great progress Paul
Thanks :) :)
There you go switches painted now for the rebuild (https://uploads.tapatalk-cdn.com/20190105/056391018ae44ce87eb9f53cc82b5834.jpg)
Sent from my SM-J330FN using Tapatalk
What paint do you use as I believe the original ones would have been anodized?
-
Great job on them Paul, i love that finish. I need to do my CB400/4 ones really, i will get round to it one day. Trig makes a fantastic job of refurbing all the switch gear for our restorations but i would like to have a go myself. I get in a bit of a mess with paint though 😀😀😁
-
Looking great Paul. Little things like that can really make or brake a restoration.
Julie I make a mess with paint everyday. ;D Theres very little chance of me doing mine as anything that is remotely like being at work gets ignored.
-
Looking great. Like Julie, I'd be interested to know what paint you have used. Do you 'flood' the on/off etc with red paint using a thin brush and wipe off the excess?
Post a pic of the finished article, the Z650 looks a stunning job.
-
Looking great. Like Julie, I'd be interested to know what paint you have used. Do you 'flood' the on/off etc with red paint using a thin brush and wipe off the excess?
Post a pic of the finished article, the Z650 looks a stunning job.
Yep I use the Simoniz tough black satin paint and then humbrol enamel. I just use a cocktail stick to flood the text and leave it for ten mins or so. Wipe off the excess very lightly with some paper towel with a bit of turps on it. The turps takes off the excess enamel but does not affect the black. You must get every bit of the old paint out of the text. I use a scalpel for this.
Sent from my SM-J330FN using Tapatalk
-
Well bars fitted, controls refurbished, grips on, throttle cables fitted and master cylinder cleaned up very nicely ;D
(https://i.imgur.com/IQvClng.jpg)
(https://i.imgur.com/NurvB4v.jpg)
-
Superb work. Well done.
-
got a bit more blingy bits back and some parts to be fitted :)
(https://i.imgur.com/O4RC2GG.jpg)
(https://i.imgur.com/QgDT26Q.jpg)
(https://i.imgur.com/4cWvJQA.jpg)
(https://i.imgur.com/vHQija3.jpg)
Indicators rebuilt
(https://i.imgur.com/olmZBYr.jpg)
(https://i.imgur.com/0YSaply.jpg)
Got a nice big parcell arriving frome silvers today hopefully will get some pics on tomorrow ;D
-
Looking good Paul 👍
-
Thanks Julie.
Well my big box arrived yesterday and got to say expensive but well happy ;D ;D 8) 8)
(https://i.imgur.com/ESrBNkH.jpg)
(https://i.imgur.com/cHbmi6R.jpg)
(https://i.imgur.com/A3sgW0z.jpg)
(https://i.imgur.com/XrO12bQ.jpg)
(https://i.imgur.com/Ly0HOKu.jpg)
(https://i.imgur.com/wuk5tBi.jpg)
(https://i.imgur.com/6cD3ssh.jpg)
(https://i.imgur.com/0GsSj38.jpg)
-
That is looking stunning.. Great work.
-
Not too shabby ;D :D :D
What have you got left to do Paul?, it can't be far off completion
-
That is looking stunning.. Great work.
Thanks James :)
-
Not too shabby ;D :D :D
What have you got left to do Paul?, it can't be far off completion
Thanks Julie. :D
Paint and a bit of the tin works.
Graham has the front mudguard for me which I need to get and the rear one is proving to be a bugger.
Peter has the clocks but trying to find a replacement part for the speedo.
Said to Graham hopefully on the road sometime this summer.
-
Not too shabby ;D :D :D
What have you got left to do Paul?, it can't be far off completion
Thanks Julie. :D
Paint and a bit of the tin works.
Graham has the front mudguard for me which I need to get and the rear one is proving to be a bugger.
Peter has the clocks but trying to find a replacement part for the speedo.
Said to Graham hopefully on the road sometime this summer.
Lovely, it looks fantastic
-
Another piece of the bling jigsaw fitted ;D
(https://i.imgur.com/55KxNOC.jpg)
(https://i.imgur.com/XLHZGg1.jpg)
(https://i.imgur.com/ADzHG4d.jpg)
(https://i.imgur.com/2JCl6DO.jpg)
-
Wow! A stunner.... looks better than new.
-
Didn't you get a cable guide with that new guard, and original OEM are not BLACK ;)
-
Didn't you get a cable guide with that new guard, and original OEM are not BLACK ;)
Yep got the original which came with the bike and it's not black ;)
-
Wow! A stunner.... looks better than new.
Thanks Rob :)
-
Well what can I say about the miracle Peter (kent400) has done on the clocks.
They were in a terrible mess and what a transformation he has done painstakingly restoring these to near perfection.
Anyone thinking of attempting this work themselves just save yourself a load of heartache and get them sent off to Peter I cannot recommend him highly enough.
Thanks again Peter ;D ;D 8)
Before
(https://i.imgur.com/SePG05j.jpg)
(https://i.imgur.com/L1ZtwjR.jpg)
And after
(https://i.imgur.com/YSUMDPa.jpg)
(https://i.imgur.com/6k80VDq.jpg)
(https://i.imgur.com/5h66spD.jpg)
(https://i.imgur.com/C5UxKEU.jpg)
(https://i.imgur.com/ABORtX8.jpg)
-
Peter has done a grand job there Paul, they look great. Just had 4 clicks back from him this week, perfect as always.
-
Peter has done a grand job there Paul, they look great. Just had 4 clicks back from him this week, perfect as always.
Didn't know he did clicks as well ;D ;D
-
Peter has done a grand job there Paul, they look great. Just had 4 clicks back from him this week, perfect as always.
Didn't know he did clicks as well ;D ;D
Bloody spell check, it just doesn't speak my language !! ;D
-
Probably American Julie, they seem to need aborialists to fix forks!
-
Peter has done a grand job there Paul, they look great. Just had 4 clicks back from him this week, perfect as always.
Didn't know he did clicks as well ;D ;D
Bloody spell check, it just doesn't speak my language !! ;D
Well you are from darn sarffe ;)
-
Most of the parts in primer at Dream machine looking forward to the next pictures ;D ;D
(https://i.imgur.com/wlZTAX5.jpg)
(https://i.imgur.com/A4CJRn3.jpg)
-
All looking stunning. Not far off finished now Paul and just in time for some spring sunshine 👍🌞.
-
All looking stunning. Not far off finished now Paul and just in time for some spring sunshine 👍🌞.
I wish the rear mudguard is proving to be a real pain >:( >:(
Anyone got a UK K1 rear mudguard spare ;D ;D
-
Hi All,
Got the speedo cowl and the horn back from the chrome platers and got them fitted.
Front brake bled.
Anyone got a K1 seat foam spare and want to get rid, been trying to get one of a certain company now 8 weeks and still got feck all >:( >:(
(https://i.imgur.com/yBpNEty.jpg)
(https://i.imgur.com/cOQFGl5.jpg)
-
Just got some more pictures from Kevin at Dream Machine comming along and should be ready soon can't wait ;D ;D
(https://i.imgur.com/mzhmblz.jpg)
(https://i.imgur.com/8XRwqSQ.jpg)
(https://i.imgur.com/mKqrBWs.jpg)
(https://i.imgur.com/JgG45KS.jpg)
8) 8)
-
Bloody lovely Paul.
-
Just got some more pictures from Kevin at Dream Machine comming along and should be ready soon can't wait ;D ;D
(https://i.imgur.com/mzhmblz.jpg)
(https://i.imgur.com/8XRwqSQ.jpg)
(https://i.imgur.com/mKqrBWs.jpg)
(https://i.imgur.com/JgG45KS.jpg)
8) 8)
This build is stunning Paul - can't wait to see the finished bike. Coincidentally, my spare tank is at the same stage - I've just fitted decals and on its way back to my painter for final lacquer coats
-
Looking good Phil 8) I am just struggling for the rear guard :(
-
Managed to get the seat finished this weekend :D
(https://i.imgur.com/rjTT3ou.jpg)
(https://i.imgur.com/rhhfQvc.jpg)
(https://i.imgur.com/7AlICRz.jpg)
(https://i.imgur.com/QzPTP6Z.jpg)
(https://i.imgur.com/FEdvfPj.jpg)
-
👍👍👍👍👍
-
OK, where is it then???
I heard you had been camping outside Dream Machine all night with your sleeping bag and camping stove waiting for them to open at 7am ;D ;D ;D ;D ;D
-
OK, where is it then???
I heard you had been camping outside Dream Machine all night with your sleeping bag and camping stove waiting for them to open at 7am ;D ;D ;D ;D ;D
;D ;D I'm at bloody work unlike you part timers who can just bugger off anytime the sun comes out ;) ;)
I left home at 5.45 this morning and arrived at work at 8.15 perfect timing.
I'll take some pictures tonight and get them on tomorrow but all I can say is stunning work from Dream Machine and a big mention to Kevin his customer service was brilliant all the way through.
-
OK, where is it then???
I heard you had been camping outside Dream Machine all night with your sleeping bag and camping stove waiting for them to open at 7am ;D ;D ;D ;D ;D
;D ;D I'm at bloody work unlike you part timers who can just bugger off anytime the sun comes out ;) ;)
Calm down Paul 🙄🙄🙄🙄🙄
-
Haha, i have just been given a sneaky peek via WhatsApp.......it looks bloody beautiful
-
There you go Julie.
I have got to say the pictures do not do it justice.
The shine is so deep that I cannot get great pictures without reflections all over them.
Dream machine have done a fantastic job in 6 weeks and I cannot praise Kevin enough fantastic guy and could not be more helpful.
Well HAPPY ;D ;D 8) 8)
(https://i.imgur.com/fse51Nh.jpg)
(https://i.imgur.com/Gs0GiBu.jpg)
(https://i.imgur.com/HoJl00K.jpg)
(https://i.imgur.com/nV5LPJf.jpg)
(https://i.imgur.com/JpycQsA.jpg)
(https://i.imgur.com/QX5kh3p.jpg)
(https://i.imgur.com/9MWCP7W.jpg)
(https://i.imgur.com/KHDUkvD.jpg)
(https://i.imgur.com/gZEqY5l.jpg)
(https://i.imgur.com/FC1Lhtk.jpg)
-
That looks fantastic Paul. Can you feel the decals through the clear coat or have they flattened it out?
-
That looks fantastic Paul. Can you feel the decals through the clear coat or have they flattened it out?
Flatted out Roy :)
-
Superb, that's where my next lot is going then.
Sent from my Pixel 3a XL using Tapatalk
-
Superb, that's where my next lot is going then.
Sent from my Pixel 3a XL using Tapatalk
Roy just talk to Kevin tell him exactly what you want great guy.
-
It really does look sooooo good Paul. That shine has so much depth to it, it looks like you could dive in and have a swim 🏊
-
They all look absolutely amazing, I would be scared to handle them.
Cheers
Dennis
-
It really does look sooooo good Paul. That shine has so much depth to it, it looks like you could dive in and have a swim 🏊
The pictures really don't do it justice Julie because of all the reflections.
-
They all look absolutely amazing, I would be scared to handle them.
Cheers
Dennis
[/quote
I am Dennis it's all wrapped up in the spare bedroom ;D ;D started stripping the front end down to fit the ears :)
-
Don't forget to chase the threads on the ears before you put them on ;)
-
Don't forget to chase the threads on the ears before you put them on ;)
Done :)
-
Started to get the painted bits fitted which allows more of the electrical bits to be mounted. :D
(https://i.imgur.com/yavtBW6.jpg)
(https://i.imgur.com/cEuLjG1.jpg)
(https://i.imgur.com/O48byJ0.jpg)
(https://i.imgur.com/fLlqVNe.jpg)
(https://i.imgur.com/2A4ILma.jpg)
-
That's enough showing off for this time of the morning :o
Looks great mate ;)
-
That is so nice, good job.
Cheers
Dennis
-
That's enough showing off for this time of the morning :o
Looks great mate ;)
;D ;D Would look even better if Parcelforce would release my Yamiya order 10 days now the tossers and they have the cheek to charge you for the privilege >:( >:(
-
There you go Julie.
I have got to say the pictures do not do it justice.
The shine is so deep that I cannot get great pictures without reflections all over them.
Dream machine have done a fantastic job in 6 weeks and I cannot praise Kevin enough fantastic guy and could not be more helpful.
Well HAPPY ;D ;D 8) 8)
(https://i.imgur.com/fse51Nh.jpg)
(https://i.imgur.com/Gs0GiBu.jpg)
(https://i.imgur.com/HoJl00K.jpg)
(https://i.imgur.com/nV5LPJf.jpg)
(https://i.imgur.com/JpycQsA.jpg)
(https://i.imgur.com/QX5kh3p.jpg)
(https://i.imgur.com/9MWCP7W.jpg)
(https://i.imgur.com/KHDUkvD.jpg)
(https://i.imgur.com/gZEqY5l.jpg)
(https://i.imgur.com/FC1Lhtk.jpg)
Lovely job 8), are the stripes decals or hand painted?
I'm looking forward to getting my paintset back from Menno at the end of June. :)
-
Decals Andrew
-
Got all the tank trimmings on at the weekend parts arrived from Yamiya.
(https://i.imgur.com/82RXkBs.jpg)
-
Looks amazing Paul. Did the red tanks come with white HONDA badges on the UK K1?, my red UK K2 came with black 🤔
-
🤔 As far as I am aware its what is listed in the parts list, and I like it ;D
-
🤔 As far as I am aware its what is listed in the parts list, and I like it ;D
I didn't say it didn't like it 🙄🙄🙄 I'm just checking what came with red (I don't know why I'm bothering as I'm changing my original ruby red to Planet Blue anyway).😀😀😁😀 What parts list are you going by?
-
🤔 As far as I am aware its what is listed in the parts list, and I like it ;D
I didn't say it didn't like it 🙄🙄🙄 I'm just checking what came with red (I don't know why I'm bothering as I'm changing my original ruby red to Planet Blue anyway).😀😀😁😀 What parts list are you going by?
Tut Tut stop getting tetchy ;) ;) ;D this parts list it does not show anything different for area codes. when graham buys it for you you can change it to black if you like ;)
-
🤔 As far as I am aware its what is listed in the parts list, and I like it ;D
I didn't say it didn't like it 🙄🙄🙄 I'm just checking what came with red (I don't know why I'm bothering as I'm changing my original ruby red to Planet Blue anyway).😀😀😁😀 What parts list are you going by?
Tut Tut stop getting tetchy ;) ;) ;D this parts list it does not show anything different for area codes. when graham buys it for you you can change it to black if you like ;)
Haha....there's a thought. But as you know, Graham would only strip the whole bike down again to make sure it was all OK 😉😉😉😉 (which I know it will be).......
-
It is a strange one Paul and i would not like to comment on a red UK, K1 as, i have never seen a red one up close and personal. I know that the gold UK, K1 had the white badges.
All the original red UK, K2's that i have ever seen had black badges on the red tank, i think RGP,s K2 had them also.
-
It doesn't matter someone will always know best weather right or wrong. Either way looks great.
-
It is a strange one Paul and i would not like to comment on a red UK, K1 as, i have never seen a red one up close and personal. I know that the gold UK, K1 had the white badges.
All the original red UK, K2's that i have ever seen had black badges on the red tank, i think RGP,s K2 had them also.
Yes, white badges- here's my 71 K1 I owned back 76-79, but ignore the chrome headlight brackets.......
-
It is a strange one Paul and i would not like to comment on a red UK, K1 as, i have never seen a red one up close and personal. I know that the gold UK, K1 had the white badges.
All the original red UK, K2's that i have ever seen had black badges on the red tank, i think RGP,s K2 had them also.
Yes, white badges- here's my 71 K1 I owned back 76-79, but ignore the chrome headlight brackets.......
Can't ignore it now Andrew why the chrome ears ;)
-
It is a strange one Paul and i would not like to comment on a red UK, K1 as, i have never seen a red one up close and personal. I know that the gold UK, K1 had the white badges.
All the original red UK, K2's that i have ever seen had black badges on the red tank, i think RGP,s K2 had them also.
Yes, white badges- here's my 71 K1 I owned back 76-79, but ignore the chrome headlight brackets.......
Can't ignore it now Andrew why the chrome ears ;)
Absolutely no idea Paul, they were fitted when I bought it - but maybe to make it look younger or due to an accident?
-
Look away you purists, I updated my K1 with chrome headlamp brackets, K2 style rear light, a 4 into 1, sprayed it white, fitted a 900 conversion and fitted clip ons, it's what we did in those days.
Dennis
-
That paintwork is great ;D
-
That paintwork is great ;D
Cheers Dave,
The pictures don't do it justice Dave due to all the reflections :(
-
Side panel livery arrived and fitted ;D
(https://i.imgur.com/nEnqLnL.jpg)
(https://i.imgur.com/5BwJy3Z.jpg)
(https://i.imgur.com/Auobfnc.jpg)
(https://i.imgur.com/hkTEcGb.jpg)
-
Show them your reflector rubber, perfect fit ;D
-
Show them your reflector rubber, perfect fit ;D
Will do when customs release them ;)
-
Show them your reflector rubber, perfect fit ;D
OK I know you mean the silvers attempt :o
When I spoke to Lyndsey she has taken it up to get the correct part put on the website the rubber is a K2 >:(
(https://i.imgur.com/uDRWZgV.jpg) ::) ::)
-
Yep :o I told Sliver the correct supersede part number more than 3 years ago. Some people just don't listen ::)
-
There you go Trigger correct parts arrived and more important FIT ;D
(https://i.imgur.com/MRR7Fqe.jpg)
(https://i.imgur.com/nNQhmsE.jpg)
-
Much better Paul 👍👍👍👍👍
-
Well a momentous weekend on the UK K1 project which has finally come to completion after 18 months.
Got to say it has been a pleasure working on it bringing a basket case back to life and hopefully keeping another one alive for many more years.
I would like to thank everyone for their help especially Graham and Julie as these things would be much harder without the expert advice which is available on this site probably involving building things up then redoing it a second time.
The garage is now well and truly full and something will have to go before I can start another project.
From this
(https://i.imgur.com/SWwlJUR.jpg)
(https://i.imgur.com/zRw2aIW.jpg)
To this
(https://i.imgur.com/IfT07dm.jpg)
(https://i.imgur.com/9OXiE4F.jpg)
(https://i.imgur.com/jGaYOn7.jpg)
(https://i.imgur.com/N4QGx6M.jpg)
(https://i.imgur.com/ucfl02n.jpg)
(https://i.imgur.com/XmLUeyE.jpg)
-
Looks fantastic Paul and a real credit to you. A very difficult project but just shows what perseverance, hard work and a 3rd Mortgage can achieve 😀😀😀. Trig has your next project already lined up for you 😭😭😭 A rare bike and one that you should be very proud to own. Great work 👍👍👍
-
Wow, fabulous bike for all that hard work.
I know everyone has their favourite size of 4 cylinder Honda, but with these 750 looking so well finished you can see completely why they made such a huge impact on motorcycling.
Superb.
-
Looks fantastic Paul and a real credit to you. A very difficult project but just shows what perseverance, hard work and a 3rd Mortgage can achieve 😀😀😀. Trig has your next project already lined up for you 😭😭😭 A rare bike and one that you should be very proud to own. Great work 👍👍👍
It had better be a monkey bike ;D ;D :o
-
That looks glorious especially when you see the "before" picture, great to see yet another one rescued.
Cheers
Dennis
-
Well done Paul, excellent work and a fantastic finish. 18 months from start to finish is a very impressive timescale considering what you started with.
Have you given it a good thrashing yet :o?
-
Superb work Paul - another great restoration of a bike that looked doomed. You should be really proud of your achievement. Love it. James
-
Thanks for the great comments from everyone, it really has been a pleasure doing it.
-
wow ...the before and after shots are pretty amazing.
Don;t expect mine to be anything like as shiny and nice.... but it's an inspiration to keep going!
-
Thanks for the great comments from everyone, it really has been a pleasure doing it.
It may have been a pleasure for you but, a nightmare for me ;D ;D ;D ;D
-
Wow! That is an impressive achievement, it looks absolutely gorgeous! Congratulations!
-
Thanks for the great comments from everyone, it really has been a pleasure doing it.
It may have been a pleasure for you but, a nightmare for me ;D ;D ;D ;D
;D ;D ;D ;)