Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: philward on March 10, 2021, 09:02:50 PM
-
Just fitted the replica 323 exhausts I got from CMSL last year (bike nearly done now!) and fit was generally good except for centre stand stop bracket on the lower exhaust is about 20mm too rearward - stand just about sits on the edge of the rubber stop (if you let the stand flick up, it pushes past rubber and clanks into the exhaust). I think I will have to make a plate to put the rubber on and screw to the exhaust bracket.
Anyone else experienced this issue?
-
Yep, I had to do just that, my stand missed the stop completely.
-
Same. Made a small plate to bring it back towards the front of the bike.
Sent from my iPhone using Tapatalk
-
I had exactly same issue, just made a small extension plate if I remember
-
You can just get a bigger rubber >>> https://www.yamiya750.com/index.php?main_page=product_info&cPath=246_251_142_88&products_id=2585
-
Well not great that, anyone contacted CMS and told them? maybe they'll replace all the No3 cylinder pipes ;D ;D
I'll probably make a bracket if mine does it but I'm thinking of using the main stand clamp bolts instead of the exhaust.
It's quite a way out. Just made one tonight out of stainless - you need to put a 90 degree 2mm lip (along the front to back length off the plate) to strengthen the bracket (20mm x 60mm ish plate really) - to stop it flexing when the stand hits the rubber