Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: paulbaker1954 on February 19, 2021, 08:07:30 AM

Title: Brake hose thread size please
Post by: paulbaker1954 on February 19, 2021, 08:07:30 AM
Anyone know what the female thread size is where the caliper steel pipe joins bottom hose.

Looking to make up some braided hose and need tight end fitting

(Part 4 in picture)
Title: Re: Brake hose thread size please
Post by: Erny on February 19, 2021, 08:29:49 AM
Paul

attached mine, original - M10x1.25
[attach=1]
Title: Re: Brake hose thread size please
Post by: Bryanj on February 20, 2021, 10:41:08 AM
Played this game a lot, several of the braided end fittings even with correct thread will not seal to the metal pipe as you need the nut on the metal pipe needs the first two thread removed to allow it to screw in far enough the seal the flare
SimplePortal 2.3.5 © 2008-2012, SimplePortal