Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: 3scs on May 05, 2019, 07:58:06 PM
-
Could anyone tell me where I can find the correct wiring diagram for a cb 550k3 uk spec please
-
This is all I can offer. Step one is to identify your model, meaning: compare engine- and framenumber to those listed here on p.4 http://www.honda4fun.com/pdf_parts_list/pdf_spac500-550/CB500-550_K3-K4.pdf
Then go to the wiring diagrams here: p.182-4 https://www.classiccycles.org/media//DIR_1653304/DIR_1653404/DIR_1653507/ecc6759db0a214d5ffff8825ffffe41e.pdf to find out which scheme is applicable for your specific model. You could also check the last two pages here: http://www.honda4fun.com/pdf_libretti/500/CB500_550/CB500_550_09.pdf
-
Its in the honda supplement to the 550 manual, not sure if it is in Ash's alladins cave. If not i will have it here somewhere.
-
In ash’s Aladdin’s cave will it be the diagram that says k3 general and Australia for the uk k3 as there isn’t one that actually says uk k3 or possibly the Europe type
-
This is all I can offer. Step one is to identify your model, meaning: compare engine- and framenumber to those listed here on p.4 http://www.honda4fun.com/pdf_parts_list/pdf_spac500-550/CB500-550_K3-K4.pdf
Then go to the wiring diagrams here: p.182-4 https://www.classiccycles.org/media//DIR_1653304/DIR_1653404/DIR_1653507/ecc6759db0a214d5ffff8825ffffe41e.pdf to find out which scheme is applicable for your specific model. You could also check the last two pages here: http://www.honda4fun.com/pdf_libretti/500/CB500_550/CB500_550_09.pdf
cant use this method as the engine is a think from an f2 thanks though
-
For the F2 there are no less than 5 different wiring diagrams (incl. the "U.K. EUROPEAN" type) in the last pages of that link.
-
Dont matter what the engine is as all wires from engine are same for all 500 and 550, very eary 500 have round pin block connectors but wires are same.