Honda-SOHC

SOHC.co.uk Forums => Other Bikes => Topic started by: Chris Turl on May 26, 2018, 10:39:13 AM

Title: CB900 K&N Crankcase Breathers
Post by: Chris Turl on May 26, 2018, 10:39:13 AM

Hi guys,

I'm sure quite a few have already done this, so could anyone help tell me what K&N crankcase filters fit onto a 1981 CB900 F2 engine.
There's quite a few out there, not sure of the clearance to the engine casing on the right hand side, if it needs raising with some tube or not.

Cheers!

Title: Re: CB900 K&N Crankcase Breathers
Post by: K2-K6 on May 26, 2018, 11:54:46 AM

Hi Chris, nice bike the 900 but I'm not sure anyone on the forum currently has one ( unless one is hidden away) . 

I don't think the breather arrangements are the same as the older SOHC motors,  so may be a bit sparse on advice here for that fitment.

Nigel.

Title: Re: CB900 K&N Crankcase Breathers
Post by: Chris Turl on June 04, 2018, 10:40:18 AM

Hi Nigel,

Ah right ok cheers for the reply mate, realise it is SOHC forum but have had some help before on here.

Cheers, Chris.