Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: MarkCR750 on May 30, 2016, 08:45:46 AM
-
My Tacho drive seal has sprung a leak, does anyone know where I can get one?, David silver have on in their engine oil seal kit I think but I don't want to have to buy the whole kit if I don't have to, thanks Mark.
-
These are prone to leak, try this first : Make sure the oil seal is all the way home by putting a long reach socket on it and give it a gentle tap.
If still leaks then PM me your address and I will pop one in the post.
-
Great thanks trigger, I'll give it a go.
-
In the post to you, comes free with every frame ;)
-
In case that doesn't work… Wemoto have them in stock I think.
-
But then i read you've got one on it's way to you!!!
-
In the post to you, comes free with every frame ;)
Thanks very much Trigger, a Brough Superior SS100 frame with a free Honda oil seal for £150 is generous to say the least 😀 , but seriously thanks very much.
-
But then i read you've got one on it's way to you!!!
It's the thought that counts Liam !
-
Seal arrived today Trigger, thanks, I'll get it fitted tomorrow, great no more burning oil smell !
-
At least you know that oil was getting to the top end ;)
-
Ha, that did cross my mind , I've done about 500 miles though so if it hadn't have been my cam would've let me know 😀
-
New seal fitted and no more leaky , I actually found 2 old oil seals in there!, also the land that the seal sits on had 2 drill holes in it (not all the way through) so a previous owner must have been struggling to take the old one out and decided to fit the new one over the old one 🙄, I used the self tapper through the seal trick and they came out easily.