Honda-SOHC

SOHC.co.uk Forums => Recommended Sources for Parts and Services => Topic started by: SteveD CB500K0 on April 08, 2010, 12:45:41 PM

Title: Repairing 500/550 Rear Hubs
Post by: SteveD CB500K0 on April 08, 2010, 12:45:41 PM

This is from Bryan Jones:

Paul Jackson Huddersfield near Junction 23 M62

01422 378100

Don't be in a rush at it takes time to find the correct piece of cast iron pipe to make the liner from and he can do it with the complete wheel, just take tyre off!

Title: Re: Repairing 500/550 Rear Hubs
Post by: PikeyBoy on April 08, 2010, 07:42:28 PM

His address is:-

12 Roundings Road
Outlane
Huddersfield HD3 3FQ

Quoted me

Title: Re: Repairing 500/550 Rear Hubs
Post by: Ewan 500 K1 on December 21, 2011, 07:47:08 PM

i remember someone saying a few years ago that the brake drum from a morris minor was a good choice for the cast iron ... close fitting once adapted

Title: Re: Repairing 500/550 Rear Hubs
Post by: matthewmosse on December 21, 2011, 11:20:39 PM

I used a rover mini drum in mine, perfect fit once subjected to the tender mercies of my lathe plus a freezer for the lining and oven for the hub.