Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: SteveW on February 17, 2020, 05:57:45 PM
-
I have been looking for one of these for a while, part number 83502323000 but without any luck so though I'd make one.
Didn't have any dimensions so worked them out from the air box lid and designed the cover on a 3D cad package.
Sent the image to a 3D printing company and got this back today. Fitted a piece of stainless mesh into it and hey presto:
-
I sell the mesh on my ebay page and RGP 750 makes the complete thing 😊😊😊😊
-
Nice work... 8)
-
That is nice.
It's great to have a few differnt sources (Rich made me one)
Steve
-
Agree, great that people make things. I'm mightily impressed with all this CAD and 3D printing produced stuff, I haven't got a clue what it is all about but I'm very impressed by the people who can use it to make things.
-
I have been looking for one of these for a while, part number 83502323000 but without any luck so though I'd make one.
Didn't have any dimensions so worked them out from the air box lid and designed the cover on a 3D cad package.
Sent the image to a 3D printing company and got this back today. Fitted a piece of stainless mesh into it and hey presto:
I had the same idea, posted it here.
http://www.sohc.co.uk/index.php/topic,15159.msg125297.html#msg125297
I went the whole hog and had the mesh 3D printed as well.