1
CB350/400 / Re: Engine rebuild Parts list
« on: March 28, 2024, 06:39:54 PM »
Bearing clearance update 2.
From the generator side first:
brown 0.025mm green 0.038mm green 0.025mm green 0.050mm green 0.050mm
brown 0.025mm
I put the brown in one of the green that measured at 0.050mm and it went down to 0.025mm. I'll remeasure the one that gave a reading of 0.038mm.
I think the best thing to do would be to go BROWN GREEN GREEN BROWN BROWN.
Then as other people have said, run it in carefully.
From the generator side first:
brown 0.025mm green 0.038mm green 0.025mm green 0.050mm green 0.050mm
brown 0.025mm
I put the brown in one of the green that measured at 0.050mm and it went down to 0.025mm. I'll remeasure the one that gave a reading of 0.038mm.
I think the best thing to do would be to go BROWN GREEN GREEN BROWN BROWN.
Then as other people have said, run it in carefully.