This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - RGP750
1
« on: May 19, 2023, 01:50:52 PM »
Well at last all is well. I gave up on the 2 flasher units I bought, one on eBay and one from a local motor factors, (Lucas for M/C) got a NOS Honda one from a mate , all is well going for a ride later. Thanks for all of your input. Rich
2
« on: May 17, 2023, 09:28:09 PM »
Thanks Brian I'll give that a try tomorrow. Ted I have used 2 relays , both new and different makes with the same result.
3
« on: May 17, 2023, 05:26:01 PM »
Re the frame powder coating I have found the company I use I ask for 80% black it looks like the original and not over glossy.
4
« on: May 17, 2023, 05:19:32 PM »
All the bulbs are as they were before the flasher unit started blowing the fuse. Obviously tracked the relay down as the culprit. and bought a new relay (well 2 actually both different makes) .I have tried reversing the black and grey and same result with both relays. God I hate electrics
5
« on: May 17, 2023, 12:50:03 PM »
3 terminal as previous one.
6
« on: May 17, 2023, 07:16:24 AM »
Sorry just thought as I was talking about relay. All 4 indicators are earthed , I'll try another new earth thanks . Not an import it's a k1 from Steve admin.
7
« on: May 17, 2023, 06:50:00 AM »
Sorry not sure what you mean. Headlight is fine main and dip. . I don't have a headlight flash button . Right indicator turns front and rear indicators but not flashing and left is the same . I have tried another different unit and it's the same ![Huh ???](http://www.sohc.co.uk/Smileys/default/huh.gif) ??
8
« on: May 16, 2023, 07:54:24 PM »
New conundrum New flasher relay fitted , fuse didn't blow, Eureka. Next problem the lights Don't flash :'( any thoughts please.
9
« on: May 14, 2023, 06:12:53 PM »
Yes everything fine, plug in relay and pop. hope the new one works ok. I would have liked an original but can't find one. Cheers Rich yes well done Ted, I owe you one.
10
« on: May 14, 2023, 07:04:19 AM »
3 terminal Ted
11
« on: May 13, 2023, 07:41:30 PM »
think that's shot. mine was a repro only fitted 2 years ago.
12
« on: May 13, 2023, 04:40:51 PM »
Don't want to rejoice just yet but it looks like the whole mess is down to a faulty Indicator relay. I have ordered a new one and will report back. Looks like Ted may get first prize. Watch this space Cheers all for your thoughts.
13
« on: May 13, 2023, 08:11:13 AM »
Thanks Brian just done this this morning. Disconnect block, check black live into headlight for continuity and all is fine , plug block in and it shorts. I then check black in sub loom and ok, check black on regulator ok. Something is happening when it is plugged in . ![Huh ???](http://www.sohc.co.uk/Smileys/default/huh.gif) ?¿
14
« on: May 12, 2023, 10:21:29 PM »
if it didn't blow before I connected the multiple in the side panel would that not mean the problem in in whatever the socket is connected to ?
15
« on: May 12, 2023, 08:38:31 PM »
OK Back track. Just found out why nothing working, knew it would be something stupid OOPs! multi plug on the loom not plugged in ![Embarrassed :-[](http://www.sohc.co.uk/Smileys/default/embarrassed.gif) But now I have plugged it in Fuse has blown so where to look now.
|