Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: hondatri on September 04, 2018, 04:11:18 PM

Title: Clutch
Post by: hondatri on September 04, 2018, 04:11:18 PM

 Hi The old Fart is Having a Senior Moment. Is there a push rod going through Hole through lock nut. I dont see one in Parts listing.

Title: Re: Clutch
Post by: Nurse Julie on September 04, 2018, 04:23:24 PM

Is it number 130 you mean? This is an adjuster bolt but not a push rod.

[attachimg=1]

Title: Re: Clutch
Post by: hondatri on September 04, 2018, 07:35:43 PM

No  Iam just wondering if there is a push rod to operate clutch  ( I am used to older bikes not familiar with the 400) I am just thinking that their should be a rod there before I fit springs and Plate. When I fit the new plates and tighten up and lock the castellated  is there a push rod or does anything go through the hole.

Title: Re: Clutch
Post by: Nurse Julie on September 04, 2018, 08:10:20 PM

No, the CB400/4 doesn't have a push rod. The CB500/4 has a full length push rod and the CB550 a very short stubby push rod.

Title: Re: Clutch
Post by: hondatri on September 05, 2018, 05:13:46 PM

Thanks for pointing me in right direction.Much appreciated

Title: Re: Clutch
Post by: hondatri on September 15, 2018, 02:41:23 PM

Clutch Sorted Thanks guys for Info