46
CB500/550 / Re: 500 k1 left lower fork slider
« on: July 12, 2020, 07:51:53 PM »
oh great ,let me know Jason
thanks
thanks
Try our new info resource - "Aladdin's Cave" (Main menu)
Just added a separate link to Ash's Dropbox thread (shortcut)
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to. 46
CB500/550 / Re: 500 k1 left lower fork slider« on: July 12, 2020, 07:51:53 PM »
oh great ,let me know Jason
thanks 47
CB500/550 / 500 k1 left lower fork slider« on: July 12, 2020, 04:09:38 PM »
hi all
Thought I had finished the re build but forks stuck in compressed mode,. Never rode the bike before stripping it down but did note no oil in the left fork when I stripped them . Anyway looks like I have found the problem, there is a small crack at the calliper arm 6mm bolt?? anyone have a half decent left hand lower for sale pleeeeeeese!! thanks Rich 48
CB500/550 / Re: Silvers electronic ignition« on: July 03, 2020, 09:49:35 PM »
Thanks Johhny
Instructions are pretty poor at the least. 49
CB500/550 / Re: Silvers electronic ignition« on: July 03, 2020, 08:45:36 PM »
Understand that Steve but Lines 16 says ' turn back plate counter clockwise until the light comes on" trouble is it is already on and you can turn as far as you like it doesn't go out .
Anyway just sorted it as previous post suggested, ignore Chinese instructions and do what you think, worked a treat, just need to balance carbs, Happy days . I'll put up pictured shortly Steve so you can see 'Goldie" in all her glory. Cheers Rich 50
CB500/550 / Re: Silvers electronic ignition« on: July 03, 2020, 07:37:28 PM »
So basically you set where you think it should be and keep moving until the marks and light match up .
51
CB500/550 / Re: Silvers electronic ignition« on: July 03, 2020, 07:04:30 PM »
Here you go ,how to you interpret it?
52
CB500/550 / Re: Silvers electronic ignition« on: July 03, 2020, 06:44:48 PM »
I'll take a photo of the instructions and see how you read it Steve
53
CB500/550 / Silvers electronic ignition« on: July 03, 2020, 06:20:53 PM »
Finally got the 500 pretty much finished.
I bought Silvers electronic ignition as had a lot of good reports. The instructions are not brilliant but following as well as I can I can't get it to do what it is supposed to do . Am I correct the light should NOTbe on when you line up the 1/4 timing market should only come on when you rotate the back plate anti clockwise? Mine is on and doesen't go off unless you turn the crank 54
New Member Introductions / Re: Hi from Nige« on: June 29, 2020, 07:00:14 PM »
Welcome Nice, great forum this
55
CB500/550 / Re: 500 no 2 exhaust pipe« on: June 29, 2020, 06:23:35 PM »
Genuine Honda odd job,
I have bitten the bullit and bought a set of csml. I have 3 very good pipes now and one usable as a last resort should anyone want to buy a set. or I may wait and see if a good no 2 turns up and sell as a good set . 56
CB500/550 / 500 no 2 exhaust pipe« on: June 29, 2020, 08:06:22 AM »
Bit of a long shot I know.
Virtually finished the rebuild and hadn't realised the no 2 exhaust is shot , other 3 are new replacements I think and are totally solid .. I don't suppose anyone out there has a pretty good one for sale pleeeeese. Repro set ,double skin header in Italy for sale, anyone had experience of these? Thanks Richard 57
CB500/550 / Re: Rear shocks« on: June 07, 2020, 08:07:28 AM »
Thanks Julie, I couldn't find them a couple of weeks ago . your'e a star (again)
58
CB500/550 / Re: flooding carbs« on: June 06, 2020, 07:13:57 PM »
can you do just the float bowl ones? ,don't really want to take the whole things to bits again
59
New Member Introductions / Re: New member Kent« on: June 06, 2020, 06:54:24 PM »
Welcome fellow Kentonion.
60
CB500/550 / Re: Rear shocks« on: June 06, 2020, 06:49:36 PM »
are they the 50 quid ones ?ruddy good quality, the guy seems to have gone now though.
|