Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - boxerdog1

Pages: [1]
1
CB500/550 / NOS CB500 K0/1/2 EXHAUST SUPPLIES.
« on: February 07, 2013, 10:21:24 AM »
Following recent VJMC E Mail providing links to International E Bay sites I have found some Nos Upper and Lower Left genuine HM323 exhausts on the Italian site under Blutony747(100%) at Euro375 inc. delivery to UK.

Although this price equates to around a quarter of the cost of a complete new CB500K1 in 1975, in today's market  they look good value vs CMS price of Euro600 who incidentally refuse to confirm that their stock is stamped HM323 (despite 4 separate 'ticket' requests !)

Just ordered Upper Left to replace one that had been repaired around the rear 'balance join' (was vgc apart from that).The other 3 pipes are fortunately virtually as new. Bike is the 1975 UK K1 which was subject of the John Nutting 'Magic Carpet Ride' test in Sept. 2011 Classic M/C Mechanics.

Still 7 Upper Lefts in stock if anyone interested

2
CB500/550 / CB500 Exhausts
« on: February 06, 2013, 05:36:36 PM »
Following recent VJMC E Mail providing links to International E Bay sites I have found some Nos Upper and Lower Left genuine HM323 exhausts on the Italian site under Blutony747(100%) at Euro375 inc. delivery to UK.

Although this price equates to around a quarter of the cost of a complete new CB500K1 in 1975, in today's market  they look good value vs CMS price of Euro600 who incidentally refuse to confirm that their stock is stamped HM323 (despite 4 separate 'ticket' requests !)

Just ordered Upper Left to replace one that had been repaired around the rear 'balance join' (was vgc apart from that) - bike is a 1975 UK K1 which was subject of the John Nutting 'Magic Carpet Ride' test in Sept. 2011 Classic M/C Mechanics. The other 3 pipes are fortunately virtually as new.

Still 7 Upper Lefts in stock if anyone interested.

3
CB750 / Rhino Horn Top Triple Tree pinch bolt torque settings.
« on: May 04, 2012, 12:13:34 PM »
Looking for correct torque settings for the three pinch bolts - have new set of the very essential spacers but cannot find specific torque settings in any of reference data available . May be the torques quoted at 32.5 - 39.8 pounds foot under 'Front Fork Bolt' within torque table within the www.salocal.com site but I need to clarify if this is actually referring to the above three bolts in question !!

These top yokes are becoming extremely rare and expensive hence my concern to get torque spot on .

Any help would be greatly appreciated.

Pages: [1]
SimplePortal 2.3.5 © 2008-2012, SimplePortal