4111
CB500/550 / Re: Battery choice
« on: April 26, 2019, 07:35:08 PM »
I have Varta fitted to all of mine and they are good, plenty of cranking power.
Try our new info resource - "Aladdin's Cave" (Main menu)
Just added a separate link to Ash's Dropbox thread (shortcut)
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to. 4111
CB500/550 / Re: Battery choice« on: April 26, 2019, 07:35:08 PM »
I have Varta fitted to all of mine and they are good, plenty of cranking power.
4112
CB350/400 / Re: Spacers on rear wheel« on: April 26, 2019, 03:00:40 PM »Comstars fitted.1.85 x 18. Must admit rode back round block when delivered.no noticeable problem.bought it to do complete rebuild.thanks for measurements.if cannot sort at Stafford etc will take long one and cut down to your measurement. ThanksComstars are not the same size as standard CB400/4 wheels / hubs / plate etc. The measurements I have given you for the spacers are for a standard 400/4 swing arm and wheel, with standard 400/4 hub, brake plate etc. The wheel may be the same size but nothing else is. 4113
CB350/400 / Re: Spacers on rear wheel« on: April 26, 2019, 02:50:30 PM »Only have wheel n spacers that came with bike which was running before strip down! Weird??It may have been running before strip down but was the back wheel where it was supposed to be?. The spacers you have are huge, almost suggest wrong wheel or wrong hub fitted. Edit...you say you have a different swing arm now, was the one you took off correct, is this one correct? 4114
CB350/400 / Re: Spacers on rear wheel« on: April 26, 2019, 02:36:05 PM »
Have you got the correct rear wheel?
4115
CB350/400 / Re: Spacers on rear wheel« on: April 26, 2019, 02:35:12 PM »
[ Guests cannot view attachments ]
[ Guests cannot view attachments ] 4116
CB350/400 / Re: Spacers on rear wheel« on: April 26, 2019, 02:25:31 PM »
USA and UK, F1 and F2 swing arms are the same (except fort he foot peg mounts on the F1). The spacers should be very similar in length both sides, it sounds like you have an incorrect spacer.I have a spare set of spacers here, I will measure them in a minute.
4117
CB350/400 / Re: 3d print files?« on: April 26, 2019, 09:17:10 AM »
Great work....well done
If I knew what a STL file was, yes, I would probably want one 😀😀😀 4118
CB750 / Re: 750F Decals« on: April 26, 2019, 08:55:57 AM »It’s an original colour F model from 1975 I have seen a picture of one in orange on a ASA site👍👍👍 4119
CB750 / Re: 750F Decals« on: April 26, 2019, 08:40:09 AM »Thanks will do thatJust thinking, did they ever come in orange as standard? I have only ever seen red or yellow. Has it been re sprayed? Is it an F or K? 4120
CB750 / Re: 750F Decals« on: April 26, 2019, 08:28:37 AM »
Contact forum member Piki (Diego) he will make you a set
4121
CB500/550 / Re: Tank removal - it's now p****** me off« on: April 24, 2019, 09:24:57 AM »5.4 ID PaulGet some nitrile fuel pipe from Silicone Planet and for now, put straight pipe joiners in line to join the new to the old, save you taking carbs off. https://www.ebay.co.uk/str/planetsilicone 4122
Humour / Re: Just try to watch without pissing yourself« on: April 23, 2019, 09:24:05 PM »
Oh dear....how embarrassing
4123
CB500/550 / Re: Tank removal - it's now p****** me off« on: April 23, 2019, 03:55:37 PM »
And in real life, its round, not flat like their pic shows, strange angle photo
4124
CB500/550 / Re: Tank removal - it's now p****** me off« on: April 23, 2019, 03:53:31 PM »5.4 ID PaulGet some nitrile fuel pipe from Silicone Planet and for now, put straight pipe joiners in line to join the new to the old, save you taking carbs off. [ Guests cannot view attachments ] 4125
CB500/550 / Re: Tank removal - it's now p****** me off« on: April 23, 2019, 03:20:18 PM »
Get some nitrile fuel pipe from Silicone Planet and for now, put straight pipe joiners in line to join the new to the old, save you taking carbs off.
|