Honda-SOHC

SOHC.co.uk Forums => CB500/550 => Topic started by: Charliecharlcomb on October 24, 2022, 04:33:25 PM

Title: Looking for a couple of rear wheel parts
Post by: Charliecharlcomb on October 24, 2022, 04:33:25 PM

Hi there,

Does anyone have a spare Sprocket Plate 41211-323-000 in original condition? Or at best do you know what the original finish was? Mine is caked in black paint but new ones seem hard to find.

Also I'm looking for the two large O (or D) rings on the sprocket side.

91262-323-000 92x2 O ring and 91261-323-000 79x2.6 D ring

CB500 K1

Any help would be much appreciated.

Dan

Title: Re: Looking for a couple of rear wheel parts
Post by: Oddjob on October 24, 2022, 04:53:15 PM

The original finish was zinc plated, it might have been bright zinc plate or BZP as it’s known but all the ones I’ve ever seen were kinda dull so maybe not. They ain’t easy to find, either NOS or undamaged but do turn up occasionally on Ebay. I have a couple of the D rings around as one of the members had some made in Europe and I took the chance to stock up on them. The other should be easy to find, just do a search on Ebay for a nitrile ring with those dimensions.

Title: Re: Looking for a couple of rear wheel parts
Post by: Charliecharlcomb on October 24, 2022, 04:58:17 PM

Thanks brilliant, thank you. I'll PM you

Title: Re: Looking for a couple of rear wheel parts
Post by: Nurse Julie on October 24, 2022, 04:59:52 PM

Dan. You've just purchased some bits from me via ebay. I also have stock of the 91262-323-000 92x2 O
rings. PM me if you want 2, they can go in the same packet as the other bits.  They are listed but you obviously didn't see them.

Title: Re: Looking for a couple of rear wheel parts
Post by: Charliecharlcomb on October 24, 2022, 05:09:13 PM

Sorry Julie, I missed that one. I should have searched by part no. I've picked one up from ebay and am hoping Oddjob has a spare D ring. I'll look more carefully next time  >:(