1
Humour / New Ship Model from Revell
« on: April 27, 2022, 09:48:15 PM »
I think I can make this one
Try our new info resource - "Aladdin's Cave" (Main menu)
Just added a separate link to Ash's Dropbox thread (shortcut)
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to. 1
Humour / New Ship Model from Revell« on: April 27, 2022, 09:48:15 PM »
I think I can make this one
2
Humour / Got some fuel today« on: March 11, 2022, 03:29:54 PM »
Got some fuel earlier on today. The bloke on pump 3 put £10 in. Where the hell is he driving to? Pump 4
5
CB350/400 / WoW - Chroming is how much for the front mudguard????« on: February 11, 2022, 05:02:33 PM »
Hi,
popped into the local chroming place I have used before to get a price for chroming the front mudguard. They quoted me £400 and they even smiled as they said it. I did check it was chrome and not gold plated! That's ridiculous, I can only assume they are pricing me out. Looks like a repo one for me. Any good places to get one? 6
CB350/400 / Cant get it in!« on: January 27, 2022, 11:17:39 AM »
Hi,
i've put the crank back in ect, joined the two cases but am now d=struggling to put the shaft thru the primary drive clutch. Its a new primary drive chain off DSS. It's close to fitting but i just cant do it. Am i missing some thing? any tips or tricks? 7
CB350/400 / Cam Horse Shoe Missing Screw« on: January 22, 2022, 11:50:30 AM »
I've mislaid one of the screws for attaching the cam chain horse shoe. I see they drilled through, can i get away with just an ordinary bolt? Also, do you loctite them in?
8
CB350/400 / Crank Finally Measured by Engineering Firm but I'm confused« on: November 17, 2021, 05:43:30 PM »
I must admit now that i'm a little of of my depth.
Firstly I had a local engineering firm measure the crank up but when i look at the manual it looks likes it's too worn. Is that correct? I also had connecting rods measured with the bearings (at least 3 anyhow!) but i'm not sure where this leads me. I'm think bolt the connecting rods on, plastigauge for clearance for bearing size??? 9
CB350/400 / Another bearing journal topic« on: April 21, 2021, 03:43:18 PM »
Hi, had a go at measuring the clearance on one journal using plastic gauge (grey). There's a first time for everything. Not got my hands dirty since I got rid of my MKII escort some 25 years ago
The bearing looks shot but the journal in tolerance I think according to the manual. 11
CB350/400 / Rear Brake Return Spring Location« on: March 15, 2021, 01:48:57 PM »
Hi,
i did look at some of the older post reference the rear brake return spring. I'm sure mine is wrong as the spring does not have any tension. Please take a look at the pictures and tell me where i have gone wrong! Thanks 12
CB350/400 / Front Brake Assemby Picture (on the bike)« on: February 16, 2021, 05:55:03 PM »
Hi,
having a bit of drama with bits n bobs on the Honda. So I've stopped working in the headlight and electrics as my little brain is confused. I thought I would add the front brake hose assembly etc. Can someone take a picture of it attached to the forks (brake block that holds the switch) and just for comfort, around the caliper itself/ thanks in advance 13
CB350/400 / Chain Stooper« on: January 23, 2021, 02:17:34 PM »
Hi,
trying to source 2 in number chain stoppers without much luck. Trawled the internet, see individuals ones starting at £22. any clues where to buy, or does anyone have a spare pair or even let me borrow one so #i can get it made. thanks 14
CB350/400 / Idiot lights - Fitting issuue« on: December 12, 2020, 07:17:24 PM »
Hi,
thought i would fit the idiot lights but the holes don't match. Its not the original as I bought this a year or more ago, The hole centre on the bracket is 45mm where the hole centre on the lights is 50mm??? Wrong idiot light cluster? 15
CB350/400 / Project to Date« on: December 02, 2020, 09:15:32 AM »
Hi,
just like to say thanks for the help so far in my build. I thought I post a picture of the current status of the bike. Next jobs are Tyres (Dunlop K82) so I can get the wheels on. Carbs to be cleaned (now stripped) Front Brake Assembly Headlight installation Seat Bottom engine cases to be vapour blasted |