This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - Bitsa (Ralph Wright - RIP)
Pages: 1 ... 5 6 [7] 8 9 ... 12
91
« on: February 23, 2014, 01:49:45 PM »
This is the way.
Cheers
Bitsa
92
« on: February 21, 2014, 08:38:29 PM »
Hi All.
Forecast for this sunday here is dry and 15 degrees.Frack it I am going for it, will fill carbs start her up and go for a long ride, saying that the forcast is rain after for the next 3 days but all I want is the grin again.The older I get I feel I do not have the choice much anymore,so I will woop it up while I can.
Go For it guys
Bitsa
93
« on: February 21, 2014, 07:17:27 PM »
Hi All,
Yes we are all aware of the recent sale of this prototype but its getting far and wide.A mate of mine nice fellow but is in to brit bikes (sad I know) is amazed it sold for that kind of money.He also hinted that they do not understand what sandcast is and this is the Vincent forum.I am sure that we all know about how much these bikes can make But all of a sudden jap crap can be worth more.Made my day.What do you make of that guys?
Cheers
Bitsa
Ps Asked me how many of them I had being jovial of course
94
« on: February 18, 2014, 07:17:18 PM »
Is it just me that notices or do some new members that join do want to give age place,where they live etc.Come on what have you got to hide?I know big bruv is out there but this is just a bike site that good guys n girls are trying to help each other out.I for one do not give a crap about your background where you live etc so you are all safe with me.
Cheers
Bitsa
95
« on: February 11, 2014, 09:13:54 AM »
Hi Guys,
When I got the bike I can not remember inside being so rusty before it was repainted.When I collected it the sprayer warned me of the rust inside didn't take much notice just removed what I could and got on with it.Read some where when its been resprayed and put in an oven to rapid dry can cause this as the heat drys the inside out causing flash rusting.Is this true?
Can anyone help as I am about to get another done and its rust free inside and if this is the case I will tell him to let it dry Naturally.
Cheers
Bitsa
96
« on: January 29, 2014, 06:50:52 PM »
Hi All,
Has anyone bought the repro ones and what do you think of them quality right length etc?
Also is there something wrong with ebay today only getting half the photos?
Cheers
Bitsa
97
« on: January 26, 2014, 08:09:18 PM »
This flash git went into a bar and over the other side he saw a gorgeous wench,So he got the waiter to take over a fine bottle of wine with a note saying she could join him any time she wished.She returned the bottle and a note saying unless you have a porche, Lamborghini, Harley a fat wallet and a 7 inch waggler forget it.The git sent another note saying I am mega rich have a massive garage full off exotic bikes and cars but there is no way I am cutting off 2 inches for you.
Cheers
Bitsa
98
« on: January 14, 2014, 07:24:20 PM »
Steve,
While I really do appreciate all your are doing but I am having trouble doing the same things which used to work ok.Tonight I am writing a Topic to a certain member and it just crashes goodbye you have lost all this stuff do it again.All my life I do not do it again.I love this site and if needed contributions are needed to get it right count me in.I am fairly sure all the genuine guys would go for it.
Cheers
Bitsa
99
« on: January 12, 2014, 02:22:24 PM »
Hi Guys,
Recently got my hands on a near rust free tank.What I want is your recommendations from guys that have used who they suggest and what your thoughts are.Here in France I know a good man but because of the situation here his prices are sky high so I am thinking use a good Brit firm.Example I can buy a bike bench with postage from the UK for 2 thirds of the price here and that's without post.It does have a couple of silly little dents to repair but apart from that no problems.Ideas please expected cost etc.
Cheers
Bitsa
100
« on: January 08, 2014, 07:27:20 PM »
Hi Guys,
Don't know if its a bad day but since put away for winter at the end of Nov pulled the covers off today and was shocked to see rust appearing in all places.Spent all day as its been nice today just DE dusting,rusting,chipped paint and generally polishing her up.After a couple of hours was seriously considering stripping her all down and start again.I know this place is well known for humidity dust etc but I think after 2 years of frackin about just want to ride not keep doing this crap.Is it the same for you guys in the UK? Examples throttle cables rusting springs of any sort rusting and anything previously polished after long hours looks like you have to do it again.Is it just me? All I can remember back in the days of riding in all weathers was once a month strip down wash off all and polish and away you go again.I am convinced its an age thing when your 20 or so didn't give a shit now I do.Have I answered my own question you old gits?
Cheers
Bitsa
101
« on: January 03, 2014, 09:22:27 AM »
Advice guys please.I have been on the look out for a spare tank for sometime,Managed to find one apart from a couple of small dents its in very good condition.Want I want to know is inside there is just a couple of rust spots no bigger than a 50 pence piece what do guys use to get these off?This tank makes mine inside look like its come of the bottom of the sea.Also its been drained recently to post but inside its not what I call a petroley smell.do not regonise this could it be methonel residue?As always all advice appreciated.
Cheers
Bitsa
102
« on: January 02, 2014, 03:19:39 PM »
Hi All.
Thought it was off a cg125 but after a quick look on ebay it did not match,Any ideas?
Cheers
Bitsa
103
« on: December 24, 2013, 09:11:20 AM »
Hi all and merry xmas.
When messaging or posting I still get the blank screen and a timeout warning yet another time no problem.
Is it just me?
Cheers
Bitsa
104
« on: December 17, 2013, 09:07:10 AM »
Hi Guys,
The greedy boys are out for Xmas just seen a set of 300s new in boxes for 3100.00 euros.I know France has always been expensive but this is taking the proverbial.I hope the bastards never sell them and they rot away over the years.Sorry for sounding so bad but these people wherever they are are killing (for me) the classic bike game.
Cheers
Bitsa
105
« on: December 10, 2013, 11:15:17 AM »
Hi Guys,
Just wondered if any one has bought a new loom recently.I did and fitted it yesterday with little problem as switch gear slightly different for the loom.After all connected and working there was 2 wires left over blue and orange same as for the winkers and I gave them a slight tug and they came right out of the harness about a foot long.After I closed her all up, all still works so I just scratched my head and thought WTH.Any one else come across this or did they just ignore the left overs?
Cheers
Bitsa
Originated from CSML
Pages: 1 ... 5 6 [7] 8 9 ... 12
|
Show Posts