Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: mickharrow on October 29, 2014, 10:33:24 AM

Title: Rear wheel spacer
Post by: mickharrow on October 29, 2014, 10:33:24 AM: Has anyone got a rear wheel spacer left hand side they could sell me. This is the straight spacer not the stepped one.none available from usual sources
Thank you
Title: Re: Rear wheel spacer
Post by: RGP750 on October 29, 2014, 11:53:17 AM: Hi Is it the one that fits into the retaining plate.
http://www.cmsnl.com/honda-cb750k0-four-general-export_model14352/partslist/F18.html#results
number 9.
if so i can make you one,did one for Bitsa this year but got dimensions from my bike but that is now buried inside a vac bag so if it is
if someone has a bike in bits can they let me have the measurements.
perhaps i'll make a couple this time.
Rich
Title: Re: Rear wheel spacer
Post by: mickharrow on October 29, 2014, 05:35:40 PM: The one I am looking for is number 9 on the exploded view.i am happy to pay if you have the dimensions to make one up but would suggest you make more than one as they seem unavailable from the usual sources

Regards mick
Title: Re: Rear wheel spacer
Post by: RGP750 on October 29, 2014, 05:59:46 PM: Hi Mick
I just need someone to give me the dimensions please.
someone must have a back wheel out of their bike.
just don't want to take mine out of the vac bag.
Rich
Title: Re: Rear wheel spacer
Post by: Bitsa (Ralph Wright - RIP) on October 29, 2014, 06:50:33 PM: Rich
I take it its the one you made for me.If so I still have it as A mate sent me an original Honda one.Can post it back to you or send it on to Mick.Your choice or will you make some more of them?
Cheers
Bitsa
Title: Re: Rear wheel spacer
Post by: Trigger on October 29, 2014, 07:34:12 PM: Rich, i have a rear wheel out at the moment. Can send you the measurements tomorrow.
Title: Re: Rear wheel spacer
Post by: RGP750 on October 29, 2014, 07:44:29 PM: thanks trig if you can let me have dimensions and bitsa can send the one i made you on to Mick.
He can have it and just pay your postage if that's ok with you.
Title: Re: Rear wheel spacer
Post by: mickharrow on October 29, 2014, 07:56:41 PM: I am so gratefull to get so much help from this forum it is absolutely first class

I am happy to pay whoever sends the spacer just let. Me know

I have some parts if they are of use to anyone namely a pair of. Komstar wheels,swinging arm,carbs headset,if they are of use to anyone just let. Me know
Title: Re: Rear wheel spacer
Post by: Trigger on October 29, 2014, 08:00:31 PM: Quote from: Bitsa on October 29, 2014, 06:50:33 PM
Rich
I take it its the one you made for me.If so I still have it as A mate sent me an original Honda one.Can post it back to you or send it on to Mick.Your choice or will you make some more of them?
Cheers
Bitsa
Bitsa, have you not found your vernier yet?
Title: Re: Rear wheel spacer
Post by: Bitsa (Ralph Wright - RIP) on October 29, 2014, 08:07:42 PM: Rich not a problem mate.Mick send me a message with your address and Trig no I aint fracked off it was a nice set gone through everything to no avail.When I stop looking I will find them sods law.
Cheers
Bitsa
Title: Re: Rear wheel spacer
Post by: Lobo on October 30, 2014, 09:15:10 AM: Mick,
Any use?
Simon

http://www.ebay.co.uk/itm/Honda-CB-750-K-Four-Complete-Rear-Wheel-Axle-With-Spacer-And-Chain-Adjusters-/181565105606?pt=UK_Motorcycle_Parts_13&hash=item2a461fa5c6
Title: Re: Rear wheel spacer
Post by: Bitsa (Ralph Wright - RIP) on October 30, 2014, 09:33:56 AM: Mick
In the post mate
Cheers
Bitsa
Title: Re: Rear wheel spacer
Post by: Trigger on October 30, 2014, 09:53:48 AM: OK. The wheel spacer in question is ID 20mm OD 34mm Width 18.45 mm.
Title: Re: Rear wheel spacer
Post by: RGP750 on October 30, 2014, 12:07:34 PM: Thanks Trig
Rich
Title: Rear wheel spacer
Post by: Doc. on October 31, 2014, 09:06:27 AM: What I want to know is, where do all these Spacers go to? :o

Is it one of those parts that are magically attracted to the deep, dark corners of Garages and Workshops?
Title: Re: Rear wheel spacer
Post by: Trigger on October 31, 2014, 09:10:43 AM: Quote from: Doc. on October 31, 2014, 09:06:27 AM
What I want to know is, where do all these Spacers go to? :o

Is it one of those parts that are magically attracted to the deep, dark corners of Garages and Workshops?
I have been thinking the same thing. If i remove any wheel spindle i always slide everything back on the spindle to keep it together.
Title: Re: Rear wheel spacer
Post by: AshimotoK0 on October 31, 2014, 09:34:16 AM: Should all be in here:

https://www.dropbox.com/s/anpzqn2r55f1o9k/CB750%20Mega%20Parts%20Service%20and%20More.pdf?dl=0

Cheers .. AshD