Honda-SOHC

Other Stuff => Misc / Open => Topic started by: BigAl (Alan) on October 07, 2009, 03:16:07 PM

Title: Chemical/electrical immersion anodise kits
Post by: BigAl (Alan) on October 07, 2009, 03:16:07 PM

Hi everyone,

Has anyone bought and used one of  these kits, would welcome any advice. Some of the nuts/bolts/washers on my CB750 K4 are looking a bit tied

Thanks in advance

Alan

Title: Re: Chemical/electrical immersion anodise kits
Post by: hector2800 on November 18, 2009, 03:40:03 PM

Would be interested in that myself if anyone has any info.

Title: Re: Chemical/electrical immersion anodise kits
Post by: Seamus on November 18, 2009, 07:38:12 PM

I must confess to having my engine bolts and a good few others re zinc plated at a local platers. These were just cleaned up using a flap wheel and delivered to the plater.
Came back looking great and only cost

Title: Re: Chemical/electrical immersion anodise kits
Post by: matthewmosse on November 19, 2009, 09:35:03 AM

A kit was detailed / featured in classic motorcycle mechanics, probly almost a year ago by now...........

Title: Re: Chemical/electrical immersion anodise kits
Post by: hector2800 on November 19, 2009, 04:15:41 PM

This place looks as if it has every angle covered. http://www.caswellplating.com/kits/index.html
Didn't know there was that much stufff out there!!!!

Title: Re: Chemical/electrical immersion anodise kits
Post by: hector2800 on November 19, 2009, 04:19:02 PM

Bloody hell!!!!  I've just seen how much they cost. Might be looking for a local plater after all.

Title: Re: Chemical/electrical immersion anodise kits
Post by: matthewmosse on November 20, 2009, 10:41:53 AM