This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - JezzaPeach
31
« on: May 18, 2019, 07:51:40 PM »
There is a classic car/bike meet at Brooklands 8am Sunday 19/5/19 if anyone is local enough.😁
32
« on: May 03, 2019, 05:02:58 PM »
There have been a lots of posts on disc pads.
Has anyone found which give the best stopping power, and how many miles to bed in the DSS ones?
Many thanks
33
« on: March 30, 2019, 04:58:15 PM »
Hi (cb500/4 K1)
Cyls 3&4 don’t seem to be running properly.
I’ve noticed when the choke lever is down, the choke connection between 3&4 can be pushed down a bit more. Does that seem normal?
All comments appreciated.
34
« on: March 18, 2019, 08:49:44 AM »
My breather tube is missing, does it run down to the same place as the carb overflow tubes?
Thanks in advance for any info
35
« on: March 09, 2019, 04:47:56 PM »
Hi any ideas why the choke would turn on its own from off (down) to on (up) while riding?
Cylinder 4 is running colder than the others which I need to adjust but could this be anything to do with it? Any similar experiences much appreciated.
Regards J
36
« on: January 19, 2019, 08:59:49 AM »
Hi
I think my sump gasket is leaking slightly.
I’ve found a post but not clear if the cover
will come off with the original 4 pipe system in place?
Also once it’s off will the strainer just fall out and
Therefore need holding up when reassembled?
(In the Haynes it’s done upside down!)
Looks like the strainer has an o ring worth replacing
while at it?
Many thanks
37
« on: January 11, 2019, 11:49:05 AM »
Hi, is anyone aware of likely gatherings to celebrate 50 years in 2021 or thereabouts?
38
« on: June 12, 2018, 02:54:31 PM »
I've seen these on DS for £90 posted. Does anyone have or know of any for sale?
39
« on: January 20, 2018, 07:23:58 PM »
I would pay a finders fee of £1,000 for info leading to a successful purchase.
40
« on: September 22, 2015, 03:10:20 PM »
Hi all. Does anyone know if covers are still available from a Mr Morretti from Stroud/Gloucester area?
I made contact a while ago and he had a batch of covers with a particular pattern, but on phoning now I can't get through. Or any other source of the correct pattern welcome!
Regards
41
« on: December 22, 2014, 03:41:25 PM »
Hi. When I bought my Cb500/4 it had a 350/4 tacho fitted and this mystery speedo. Can anyone help me work out what it's for? It's in vgc and it would help me to advertise it correctly.
[ Guests cannot view attachments ]
42
« on: April 09, 2014, 12:04:37 PM »
Hi, I have found guage repairs.com and classicbikepartscheshire.com
Can anyone recommend a refurb/replace specialist?
43
« on: February 12, 2014, 05:35:48 PM »
Have got these (mph) but need 500/4 ones
44
« on: December 03, 2013, 03:13:51 PM »
I was lucky enough to have owned one in the mid '70's UGP96M which was utterly reliable on trips to Imola, Nurnburgring (Ago winning the last 500GP on the MV) Barcelona etc. and am keen to find one to restore and keep. Pleased to hear of one wanting a good home. Location not too important.
45
« on: November 08, 2013, 03:50:07 PM »
I would be interested if it still exists?
Had a problem uploading the photo.
|
Show Posts