Honda-SOHC
General => Site Feedback / FAQ / How to... => Topic started by: singal.satish007 on June 05, 2016, 10:22:43 AM
-
Hi every one , I need the proper clearance of the rockar arm on my cb250 k4 , the set of 312 rockars are fixed on my bike , I got 5 to 10 mm clearance between the can and rockar please guide ,
The engine is too noisy.
Sent from my Q1010i using Tapatalk
-
should that not be 0.5 to 1 which is still too big but don't have a manual for that one
-
Have you tried looking or asking on Hondatwins.net?
-
[attachimg=1]
Full manual in my Dropbox link Genuine Honda