Recent Posts

Pages: [1] 2 3 ... 10
1
Misc / Open / Re: Chrome plater recommendations
« Last post by SteveW on May 19, 2024, 10:33:13 PM »
Just an update, I contacted Marque Restore in Coventry. They have quoted me £42 plus vat each for the headlight ears.
The good thing is, you can book your place in the queue for a deposit of £50 plus vat. So I have booked my spot and they will contact me about a week before it’s my turn. I then send them off and two or three weeks later I get them back.
They say my slot will be around end of June which isn’t too bad.
I’ll post pics when done.

Thanks Ash for the recommendation.
2
The Black Bomber Board / Re: 67` Bomber running problems
« Last post by mo goldie on May 19, 2024, 10:27:47 PM »
are goodo then Ash I was some use ha......... pity you did Not Have two ha :(

that would have made it all the more worth while  ;D
3
CB500/550 / Re: 500K0 unfinished project on eBay
« Last post by mickwinf on May 19, 2024, 10:18:23 PM »
I did have a bid but not successful.
4
CB350/400 / Re: Brake Torque Arm colour
« Last post by Athame57 on May 19, 2024, 10:16:29 PM »
Just took a look at the part on CMSL ( why you not do this before I hear someone say  ;D ) It seems they start out as BZP, I can see myself stripping the paint and polishing things up, and then finding out why they end up being painted?  :-\
5
CB350/400 / Re: Brake Torque Arm colour
« Last post by Athame57 on May 19, 2024, 10:04:32 PM »
I'm sure it could be black or BZP, the same as the 500/550. And, it's F I remember correctly, both finishes are the same part number 🤔🤔🤔
These are the two colours I keep seeing Julie! I'm not becoming a fanatic over it, but I'm keen all the same to bring my bike close to original as I go along. Pattern parts are usually ok with me though.  ;)
6
Project Board / Re: Doms CB550F1 project
« Last post by Bryanj on May 19, 2024, 09:49:04 PM »
Just got to work and was going to suggest standard bars might help
7
The Black Bomber Board / Re: 67` Bomber running problems
« Last post by AshimotoK0 on May 19, 2024, 08:58:58 PM »
are thanks Ash........ well its Not just the mrs then that I upset LOL

so I have sent that off to the bloke .... I hope he will find a sprocket that will fit with them Dimensions.

so thanks Again Ash to the rescue  ;D or should I say MR Honda  ;D

Well it went OK 'cos I found a NOS one in there for my own Bomber I wasn't aware I had  and didn't realise they are so rare !
8
CB500/550 / Re: 500K0 unfinished project on eBay
« Last post by AshimotoK0 on May 19, 2024, 08:55:24 PM »
Near to me (across the field from my house) but I have enough junk ... so deffo not me.
9
CB350/400 / Re: Brake Torque Arm colour
« Last post by Nurse Julie on May 19, 2024, 08:32:16 PM »
I'm sure it could be black or BZP, the same as the 500/550. And, it's F I remember correctly, both finishes are the same part number 🤔🤔🤔
10
CB350/400 / Brake Torque Arm colour
« Last post by Athame57 on May 19, 2024, 08:26:55 PM »
I'm beginning to notice the brake torque arm on the CB400F/2 in different colours in different pictures, how should the standard one be?
Pages: [1] 2 3 ... 10
SimplePortal 2.3.5 © 2008-2012, SimplePortal