Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: yozzer74 on July 22, 2015, 05:15:05 PM

Title: Wheel bearings
Post by: yozzer74 on July 22, 2015, 05:15:05 PM

Hi fitted my front wheel bearings today .but when I've put spindle back in and nipped it up the wheel won't turn .if I just nip it up finger tight it's ok .we're have I gone wrong ???

Title: Re: Wheel bearings
Post by: hairygit on July 22, 2015, 05:39:39 PM

Is the spacer from between the bearings fitted? Is the sleeve nut on the spindle fitted the right way round, and the spindle itself in the wheel the right way?

Title: Re: Wheel bearings
Post by: yozzer74 on July 22, 2015, 06:40:13 PM

Yeah the spacer is between the bearings every thing right way checked with schematics .when I fitted bearings I left a little gap between the spacer and the bearings .after watching a video on u tube  could it be I should not have left a gap .??

Title: Re: Wheel bearings
Post by: hairygit on July 22, 2015, 08:19:58 PM

Certainly seems a strange thing to do! Is the bearing under the retaining ring fully home, it does need to be? I personally would check both bearings are fully home, and the retaining ring is in as far as it will go.