This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - paul G
Pages: 1 ... 105 106 [107]
1591
« on: June 12, 2013, 08:31:47 AM »
John,
I recently had some rings for the 550 from silvers.
The rings are slightly different if you look at them one is square and the other slightly tapered.
It tells you the installation sequence in the manual if you have one, the rings are marked with a "N" this needs to go to the top if I remember correctly.
Hope this helps.
Regards,
1592
« on: May 24, 2013, 08:24:46 AM »
Hi,
Removed the sump on the 550 K3 yesterday and found this broken bit.
Can anyone help me with its identification.
Regards,
1593
« on: May 03, 2013, 12:21:17 PM »
Hi Jon,
Welcome to the group, I am from Brinsworth near Rotherham S. Yorks.
I have a restored 76 400 4 which I am riding and also have a 550 K3 project on going.
Regards,
1594
« on: April 03, 2013, 12:54:12 PM »
Hi All,
As the switchgear for the K3 is discontinued and virtually impossible to get hold of can anyone confirm that this is the same as the 400/4 except the connectors on the end.
These are quite easily obtainable and should be quite easy to convert, just not sure if everything else is the same.
Thanks
1595
« on: April 02, 2013, 12:17:44 PM »
Found it and ordered one thanks.
1596
« on: April 02, 2013, 12:08:49 PM »
Thanks will have a look is it in the 550 section.
Regards,
1597
« on: April 02, 2013, 11:37:58 AM »
Hi all,
Has anyone found a plug socket to fit cylinders 2 and 3 or does it need to be a box spanner !!
My socket will not go past the head cover.
Regards,
1598
« on: March 20, 2013, 08:24:38 AM »
It depends on how many coats you intend putting on there. I did mine with a couple of coats and 500ml with thinners was ample for this. I used more lacquer but put several coats on.
1599
« on: February 28, 2013, 08:30:53 AM »
Get some new cord and make some new ones far cheaper.
Cord can be easily obtained on eBay.
Regards,
1600
« on: February 28, 2013, 08:24:37 AM »
Hi,
Can anyone recommend a good chrome plating company in the Sheffield area.
Someone told me Prestige plating in Barnsley, I found a number for them but no one answers.
Cheers
1601
« on: February 26, 2013, 12:18:40 PM »
I have just had my frame and other parts blasted and powder coated and would recommend LSN coatings in Castleford I live in Rotherham and it is only 30 mins up the motorway.
Regards
1602
« on: February 14, 2013, 06:19:59 PM »
Log book states black but that could have been changed but as far as I am aware these are the Honda details
1977 CB550 K3
Engine#: CB550E-2000001-
Frame#: CB550-2000007-
Colors: Excel Black
Remarks: tank stripe red w/gold; gold side cover emblem, "550 Four K"
1603
« on: February 13, 2013, 12:15:09 PM »
RS have phoned me today and they don't do it any other suggestions.
Regards,
1604
« on: January 31, 2013, 12:38:40 PM »
Hi,
Just started my second restoration project a CB550 K3.
If anyone is looking for some powder coating done I would recommend LSN coatings in Castleford CHEAP and a first class job.
CB550 frame blasted and coated £85.
Regards,
1605
« on: January 30, 2013, 06:25:09 PM »
Hi all,
New to the UK forum but been on the US one for some time.
I have recently finished the restoration of a CB400 4 F1 and moved onto my latest restoration a 78 CB550 K3 (77 model by the frame/engine No's). I am looking for any information on the paint (Excel Black) I believe, has anyone found a match for this if so have you got a paint code.
Regards,
Pages: 1 ... 105 106 [107]
|
Show Posts