Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: deltarider on June 25, 2023, 03:39:43 PM
-
No, no plans to open it, but I always wondered; what does the killswitch look like inside? Brass contacts? Steel? Any pics?
-
From memory brass contact pins on end of cables set in body with contact strip on red switch
-
Brass contacts set inside a bakolite type plate and a small contact plate with a spring under it inside the red plastic part of the switch.
-
Thanks gentlemen.
-
If you ever have the joy of trying to put one back together after restoration, it's a memorable experience (for all the wrong reasons).
-
If you ever have the joy of trying to put one back together after restoration, it's a memorable experience (for all the wrong reasons).
Yea ... try fitting a black kill-switch knob from a really early 750K1 to a K0. Metal pin is slightly shorter
-
Hi Deltarider
I think I have some pictures of mine when I had the switches apart a few years ago. If you email me I will send you the pictures
Best Regards
Nigel
-
…just taken mine apart… luckily the ball bearing stayed put.
-
And again