31
New Member Introductions / Re: Just joined
« on: April 12, 2024, 01:12:38 PM »
Interesting pics Mike! Never tried cous cous for brake fluid before!🤣
Try our new info resource - "Aladdin's Cave" (Main menu)
Just added a separate link to Ash's Dropbox thread (shortcut)
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to. 31
New Member Introductions / Re: Just joined« on: April 12, 2024, 01:12:38 PM »
Interesting pics Mike! Never tried cous cous for brake fluid before!🤣
32
Misc / Open / Re: Barn find!« on: April 12, 2024, 12:25:23 PM »
For sure Ted! This one is approaching 100 year old.
33
Misc / Open / Re: Barn find!« on: April 12, 2024, 10:56:38 AM »
For anybody that is interested. I fully intended to leave this old lump till winter but because the weather has been quite crap recently I just can’t walk past this thing without doing something. She is fully stripped down with cam and exhaust valve rocker and governor mech taking a bath in a bucket of diesel. Haven’t found anything drastic as yet.
34
CB500/550 / Re: CB550 Cylinder 1&2 not firing« on: April 11, 2024, 06:50:54 PM »
Sounds like fuel issue alright. Electrical delivers to 1&4 and 2&3 cylinders of course.
35
New Member Introductions / Re: Just joined« on: April 11, 2024, 06:48:20 PM »
Hi Mike, plenty of knowledge and help on here for the 550, good luck and look forward to some pics. 👍
36
SOHC Singles & Twins / Re: My first project - 1974 CB360 K0« on: April 11, 2024, 06:56:38 AM »
Hacksaw method works for me.👍
37
New Member Introductions / Re: New member.« on: April 11, 2024, 06:47:13 AM »
Welcome Tim! Other models are available! 😂
38
Misc / Open / Re: Spoke thread?« on: April 08, 2024, 09:29:43 PM »
Of course that figures Ian. Never thought of Alex. Nice one! Thanks.
39
Misc / Open / Spoke thread?« on: April 08, 2024, 08:11:29 PM »
This has probably cropped up before but what is the thread on my spokes? I know that sounds like how long is a piece of string! Thing is I have probably 4 sets of spokes that were wrongly sent for my C90’s number of years ago, just cheap so not worth sending back at the time. Now I would like to shorten them and re thread them to fit a 14” wheel off a QT50. I couldn’t get my metric or imperial thread gauge to marry up to the thread. Anybody else encountered this?
40
Out & About / Re: OUT AND ABOUT 2024« on: April 08, 2024, 08:04:25 PM »
Lovely line up of bikes Julie!😁
41
Project Board / Re: Teds new project a CB500 K1 mostly version 0.5 circa 1972.« on: April 08, 2024, 07:59:49 PM »
Sounds like good work done there Ted! Satisfying end to a small crisis.👍
42
Project Board / Re: The rebirth of Lazarus« on: April 08, 2024, 07:56:36 PM »Never managed a wheelie on the 500, but i was 21 stone at the time!More than happy with both wheels firmly on the ground these days!😁 43
CB350/400 / Re: Buying large amounts of parts from yamiya or impex« on: April 08, 2024, 07:21:51 PM »
Had some bits and pieces from them too.
Sent from my iPhone using Tapatalk 44
Project Board / Re: The rebirth of Lazarus« on: April 08, 2024, 08:35:55 AM »My original 500 used to slip like buggery on take off if useing a handfull of throttle taking several hundred yards(old english measurment) before stopping, never wore out and gave up worrying about itDoesn’t help when trying to wheelie!😂 45
CB350/400 / Re: Buying large amounts of parts from yamiya or impex« on: April 08, 2024, 08:32:27 AM »Good service Dave! Checked out their website, some nice bikes in stock too! 😜Walk in with a part number and ask if it can be ordered, if in uk 3 days if europe 3 weeks |