Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: Niko on May 18, 2017, 08:01:33 PM
-
Hi...mine is a 20mm thread job. With two outlets
Inside is a little nylon cone....
How do I stop it leaking....or how do I replace.
It's driving me nuts and wrecking my floor.
My house smells like a bp garage
Sent from my iPad using Tapatalk
-
Buy a new one, or don't put petrol in it.
-
Buy a new one, or don't put petrol in it.
;D ;D ;D ;D ;D ;D ;D
-
For the 750F1 which uses a similar design of tap, albeit with a single outlet, Honda do a repair kit, which has a new nylon mesh cone and the large rubber washer that seals the joint between the tap and tank. The washer is sadly not available as a separate item, only in the kit, which is not particularly cheap.
-
For the 750F1 which uses a similar design of tap, albeit with a single outlet, Honda do a repair kit, which has a new nylon mesh cone and the large rubber washer that seals the joint between the tap and tank. The washer is sadly not available as a separate item, only in the kit, which is not particularly cheap.
Do you have a link please...
Sent from my SM-G935F using Tapatalk
-
Buy a new one, or don't put petrol in it.
....tried not putting petrol in...but it's a bugger to start...lol
Sent from my SM-G935F using Tapatalk
-
Try this...https://www.davidsilverspares.co.uk/CB550F1-SUPER-SPORT-1976/part_5058/ Is the washer what you need?
-
Are you on commission from Sliver, Hairy ;)
-
Are you on commission from Sliver, Hairy ;)
No Trig, unlike you, I have no issues buying from him, He has invested a lot of money in getting replacement parts made (ie 750F1 caliper bodies) that are otherwise unobtainable and would keep an otherwise good bike off the road!
-
Cheers....i think the cone is worn
Sent from my SM-G935F using Tapatalk
-
Got one today from d and k....17 quid......and it doesn't leak!
Sent from my iPad using Tapatalk