Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: jon stead on May 02, 2018, 07:00:13 PM
-
Bought a set of new plug caps the other day. They’re slightly different to the ones I have already in that #2 and #3 on my bike are straight. The new set has 2 x longer ones and 2 x 120 degree ones. Anybody know which ones go where.
I’ve fitted the longest ones to #1 and #4 and the 120 degree ones to #2 and #3, but not sure if this is correct as the HT lead routing to 2 and 3 seems strange.
-
That’s how they are on mine.
The longer ones on the outside point backwards with the leads being retained by clips on the breather cover. The two middle ones point forward.
-
Originally the shorter caps were on #1 and #4, but... often, when HT leads were trimmed, many needed the long ones on #1 and #4 and straight ones on #2 and #3. That's what I have, to accomadate the over time somewhat shortened HT leads.
-
Ah, makes sense now. Thanks
-
I have the 2 longs ones on 1 & 4 and instead of the 120 degree ones I used some long completely straight ones.
Yes that’s what I had on originally. I’ve fitted the new ones, as supplied, with the 120 degree ones on #2 and #3, pointing forward.
-
Originally it was like this on all CB500/550s.