This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - alexojones
Pages: [1]
1
« on: October 20, 2018, 11:48:02 AM »
Hi Guys , hoping you can help, I have a 78 CB750K. The headlight glass rattles / vibrates making a horrible sound. What am I missing . Does it need springs And if so where can I get them from.
Thanks
Alex
Sent from my iPhone using Tapatalk
2
« on: June 26, 2018, 07:20:52 PM »
Hi All
Apologies is the answer is already on the site I couldn’t find it.
I’m trying to replace my handle bars and bolts for ignition points cover.I’ve got a CB750K 1978 import.I live in UK Worcestershire.
A gravelly skid hurt my pride and a lot of chrome work ...
David Silver has sorted me for most things.Ive tried about 8 bike shops and two failed purchases on eBay! ( yes I’ve tried giving them the measurements , lost in translation I guess)
I’m looking for bars with a 4in rise or ideally a bit less that I don’t have to change cable set up with.
Thanks
Alex
I
Sent from my iPhone using Tapatalk
3
« on: May 16, 2018, 09:23:36 PM »
I go to this place near Stratford on Avon , the guy is really experienced with CB750’s and also doesn’t rip you off. https://www.bgmcaferacers.comSent from my iPhone using Tapatalk
4
« on: April 19, 2018, 02:52:44 PM »
You have to take the clutch lever off the bike, then it just pushes out. Fit the new one from the lever side by threading the wires through then pulling gently until the switch positions itself in the recess.
Sent from my X6pro using Tapatalk
Thanks for the advise , all fitted now. Seemed bloody obvious once you’d told me ! Sent from my iPhone using Tapatalk
5
« on: April 19, 2018, 01:00:05 PM »
This is probably a dumb question , so apologies in advance, I’m trying to replace the clutch switch. On my clutch lever there is a bit of plastic sticking out where I’m guessing the old one broke off , how do I get this out . I can see a small hole on bottom of clutch lever as per photo I’ve tried this but no luck .Do I just use more force and pull old bit of plastic out ?
Thanks
Alex
Sent from my iPhone using Tapatalk
6
« on: April 18, 2018, 08:14:57 AM »
Nice one thanks Trigger
Sent from my iPhone using Tapatalk
7
« on: April 18, 2018, 07:57:12 AM »
Thanks Trigger, in that case I’ve got the Diode, do I just connect the green and red wire in the headlight direct to the clutch switch then ?
Cheers
Alex
Sent from my iPhone using Tapatalk
8
« on: April 18, 2018, 07:20:57 AM »
Hello
Does anyone know where I can get a clutch switch diode from , I live in the UK and I’ve got a 1978 CB750K .
I’ve got a green and red wire in the headlight which I think need a diode .I’ve managed to find a new clutch switch on eBay but looking at the diagram and reading the forums I think I need a diode to connect the two .
Please let me know if I’m wrong as I’m very new to this !
Thanks in advance
Alex
Sent from my iPhone using Tapatalk
9
« on: April 09, 2018, 09:38:17 PM »
That will be 32100 405 611 
Link>>> http://www.partsnmore.com/parts/?filters[fitting]=custom&q=wiring+harness
Thanks Trigger , much appreciated Sent from my iPhone using Tapatalk
10
« on: April 09, 2018, 01:10:35 PM »
Hello
Hope someone can help or point me in the right direction.
I want to put a new wiring harness / loom in my 1978 CB750K USA import .
I can see a fair few on eBay and wanted to ensure I get the right one. Anyone know what the right OEM number is ?
Thanks
Alex
Sent from my iPhone using Tapatalk
11
« on: March 04, 2018, 11:59:24 AM »
These warning light cover are a pattern part, quite OK but you need to check the lenses are secure in the cover as they have been known to fall out. A spot of two part resin adhesive on the inside around the lens corners would be a wise move. Re-fitting with the correct screws is important.
Thanks for the advise , much appreciated , I’ve ordered one and will use the resin adhesive. Sent from my iPhone using Tapatalk
13
« on: March 03, 2018, 09:57:09 PM »
you mean the bit that covers the idiot lights? i'm pretty sure you can get them on ebay or david silver.
Yep that’s the one , I’ve tried David Silver and I can’t seem to find one on eBay I can only see the oblong ones for later models , thanks for advise though. Sent from my iPhone using Tapatalk
14
« on: March 03, 2018, 07:02:43 PM »
Anyone know where I can get a replacement baseboard cover / sticker for a 1978 CB750K ( American import ) but I think the part would be same a UK version or would I have to buy a whole new Dashboard! Thanks Alex
Sent from my iPhone using Tapatalk
15
« on: March 03, 2018, 07:02:11 PM »
Any know where I can get a replacement baseboard cover / sticker for a 1978 CB750K ( American import ) but I think the part would be same a UK version or would I have to buy a whole new Dashboard! Thanks Alex
Sent from my iPhone using Tapatalk
Pages: [1]
|
Show Posts