Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: SteveD CB500K0 on November 05, 2007, 08:57:41 PM

Title: K2 Fuel Pipe Routing
Post by: SteveD CB500K0 on November 05, 2007, 08:57:41 PM

I have a gold K2 in my garage at the moment that won't run as the fuel pipes are kinked where the PO has installed inline filters.

Can someone post a picture of the routing for the two fuel pipes?

At the moment they go down underneath the manifold, up between 3/4 and onto the fuel tap. Can't be right...

Title: Re: K2 Fuel Pipe Routing
Post by: mick on November 05, 2007, 10:19:34 PM

Hi Steve, on my 750 the fuel tap is on the right hand side with 2 outlets , front outlet petrol pipe goes above inlet rubbers then drops down & connects between 1&2 , and second outlet comes off tap down between 3&4 and connects to carb, they both feed the carbs from above , i had the same problem when i used inline filters so i took them off and up to now all is well , hope this helps mick. ;)