Honda-SOHC
General => New Member Introductions => Topic started by: NeilCampbell on June 26, 2021, 04:45:16 PM
-
Hi Folks,
I have just bought ‘Nurse Jullie’s’ bike and I just want to cosmetically refresh some aspects of the machine. I want to remove the battery carrier but it seems linked to other elements of the bike. Can anyone please advise me if it can easily be done and any tips would be welcome.
Also I guess removal of the rubber air intake is just a case of easing it off up up through the frame.
Cheers
Neil
-
Battery box is unbolt and wangle, air box with rubbers requires a degree in origami plus anglo saxon verbiage and elastoplast
-
Hi Neil.
You are probably aware of CMSNL anyway but if not, there are microfichès available of the complete bike.
Here's the link to the relevant 400 four F2 fichés.
https://www.cmsnl.com/honda-cb400f2-england_model14647/partslist/#.YNdYe2nTWyU
This one shows the relevant parts of the battery box area that may help you.
[attachimg=1]
-
Thanks Bryan/Julie
-
Hi Neil,
Welcome to the forum where I think you will find lots of knowledge, experience, banter, shared interest and support. Good to have you aboard. ; :)
I too have the CB400f and live in Shrewsbury. Which part of Shropshire are you ?
Regards
Dennis
-
Welcome Neil - hope you enjoy the forum - and your new bike!
-
G'Day Neil... welcome from the other side of the globe...!!
-
Hi Guys,
Thanks for your welcome.
Dennis, I’m in Condover, just outside Shrewsbury
-
Welcome to the Forum I'm in the early stages of a complete 400 rebuild. From my Memory I could not remove the battery box from my frame it was impossible until I I removed the rear wheel and inner mudguard then it came out easily.
-
Thanks Ted
-
Hi Neil,
That’s great. I am in Shrewsbury, so not far away. I will PM you to what we can arrange regarding a meeting. Kindred spirits ! ;D
Regards
Dennis