This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - JustcallmeMrT
1
« on: July 26, 2018, 05:49:52 PM »
Well that looks a lot nicer than when we crammed it into the back of your corsa! Nice job mate!
Sent from my iPhone using Tapatalk
2
« on: December 20, 2016, 06:02:11 PM »
I used the dynatek caps.
Sent from my SM-N9005 using Tapatalk
3
« on: December 20, 2016, 08:49:34 AM »
I'm using an electrex unit as well on my 550, and am also running a motobatt AGM battery.
Sent from my SM-N9005 using Tapatalk
It seems like the lithium battery is not a great idea so il have to rethink where to mount the battery. Can I ask what model of motobatt you fitted?
Thanks
Mike
I used MBT9B4. It's a smaller battery but I typically kickstart the bike and have converted all lights to LED. That said, I've had no issues. Sent from my SM-N9005 using Tapatalk
4
« on: December 18, 2016, 05:19:56 PM »
I'm using an electrex unit as well on my 550, and am also running a motobatt AGM battery.
Sent from my SM-N9005 using Tapatalk
5
« on: December 16, 2016, 06:44:30 PM »
Whats the recommendations for replacement batteries....... Lets assume that money is not the deciding factor, and were after performance and longevity......... The battery will be in a cold garage over winter, on the bike with an optimiser permanently fitted. The optimiser is rated for all types of battery......... Should I go for Lead Acid, Glass Mat, Gel, or Lithium?
Glass mat. Motobatt. Not that I have much experience, but this hasn't let me down. Sent from my SM-N9005 using Tapatalk
6
« on: August 14, 2016, 11:20:39 PM »
I've got controls from an R1 so my switch is on the lever.... you could run it to the stop switch and then up from there, would just need an additional 2 banjos.
Sent from my SM-N9005 using Tapatalk
7
« on: August 14, 2016, 03:00:35 PM »
I went with Venhill brake lines and fittings (20 deg. banjos) run directly from the caliper to the MC. You just need to make sure that the position of the fittings doesn't torque the caliper at an angle, but it's not difficult to set up. I ordered direct from their website. http://www.venhill.co.uk/Hoses_-_Components_&_Lines/POWERHOSESent from my SM-N9005 using Tapatalk
8
« on: July 25, 2016, 11:31:49 AM »
Hi Mr. T. I'd be grateful if you could check the space please and send me the link to the e-bay page so I could look at the cost.
I'm currently away from the bike until Friday but will have a look when I can. Sent from my SM-N9005 using Tapatalk
9
« on: July 23, 2016, 10:49:35 PM »
I used this kit that I got from eBay, and I'm happy with it. I did, however, replace the standard headlight bucket with a Lucas one at the same time, so not sure if the fan would fit in the standard setup. I could check if you're interested.    Sent from my SM-N9005 using Tapatalk
10
« on: July 23, 2016, 08:14:11 AM »
How have you found the motogadget has performed now that you have had it for a while, I have just bought an m unit, m button, push buttons and new loom?
I looking at positioning the unit next to all the original kit in my new battery box before sending the frame to powder coat
It's worked without any issues whatsoever. Good piece of kit. Sent from my SM-N9005 using Tapatalk
11
« on: July 21, 2016, 01:14:15 PM »
No worries, good luck with the build!
Sent from my SM-N9005 using Tapatalk
12
« on: July 21, 2016, 11:48:10 AM »
Are they the ones from the top of the head to locate the cam cover?
Sent from my SM-N9005 using Tapatalk
13
« on: July 13, 2016, 06:45:01 AM »
I went with Electrex, good stuff and great customer service.
Sent from my SM-N9005 using Tapatalk
15
« on: July 12, 2016, 07:22:36 PM »
Welcome!
Sent from my SM-N9005 using Tapatalk
|
Show Posts
