Honda-SOHC

Other Stuff => Misc / Open => Topic started by: haynes66 on January 09, 2021, 07:55:26 PM

Title: wiring loom clips
Post by: haynes66 on January 09, 2021, 07:55:26 PM

anyone know where i can get similar wiring loom clips as used on the 750? the ones with the black wrap around it

Title: Re: wiring loom clips
Post by: paul G on January 09, 2021, 07:56:31 PM

Yamiya ;)

Title: Re: wiring loom clips
Post by: haynes66 on January 09, 2021, 08:08:57 PM

that is awesome!  many thanks. i've never bought from japan before. is carriage expensive? the clips are only around a tenner

Title: Re: wiring loom clips
Post by: Bryanj on January 09, 2021, 09:12:41 PM

Depends on how much you spend, including postage, if HMRC and post office get involved

Title: Re: wiring loom clips
Post by: AndyD on January 10, 2021, 09:50:43 AM

Hi,
Might be of use - had a similar issue with the CJ250t that has a bracket with two plastic coated cable clamps that were badly perished.
Found a work-around using heatshrink and came out OK.
[attach=1][attach=2]
Also needing just a couple of wire ties it seems these are either very pricey or only available in far flung parts of the world so I finally found bare ties from Auto Electric Supplies and then used heatshrink to make a passable version of the original ties.
[attach=3][attach=4][attach=5]
Cheers,
Andy

Title: Re: wiring loom clips
Post by: haynes66 on January 10, 2021, 06:50:56 PM

thank you. someone on another forum told me that lambretta ones are similar and readily available so i've ordered a pack to see how they look

Title: Re: wiring loom clips
Post by: adespin on January 12, 2021, 02:52:36 PM

Quote from: AndyD on January 10, 2021, 09:50:43 AM

Hi,
Might be of use - had a similar issue with the CJ250t that has a bracket with two plastic coated cable clamps that were badly perished.
Found a work-around using heatshrink and came out OK.
(Attachment Link) (Attachment Link)
Also needing just a couple of wire ties it seems these are either very pricey or only available in far flung parts of the world so I finally found bare ties from Auto Electric Supplies and then used heatshrink to make a passable version of the original ties.
(Attachment Link) (Attachment Link) (Attachment Link)
Cheers,
Andy

 Thanks for the tip, great website. :) :)

Title: Re: wiring loom clips
Post by: 71 V12 on January 17, 2021, 06:17:58 PM

Quote from: AndyD on January 10, 2021, 09:50:43 AM

Hi,
Might be of use - had a similar issue with the CJ250t that has a bracket with two plastic coated cable clamps that were badly perished.
Found a work-around using heatshrink and came out OK.
(Attachment Link) (Attachment Link)
Also needing just a couple of wire ties it seems these are either very pricey or only available in far flung parts of the world so I finally found bare ties from Auto Electric Supplies and then used heatshrink to make a passable version of the original ties.
(Attachment Link) (Attachment Link) (Attachment Link)
Cheers,


Andy

Great tip👍👍

Title: Re: wiring loom clips
Post by: SeanFD on January 27, 2021, 07:17:15 PM

Agree. Good info.

Title: Re: wiring loom clips
Post by: haynes66 on January 28, 2021, 03:53:04 PM

i'll try to post some pics later but i got some lambretta clips and some 9.5mm black heatshrink from screwfix and they look ok