Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: Arch stanton on March 12, 2018, 08:42:58 PM

Title: Side panels
Post by: Arch stanton on March 12, 2018, 08:42:58 PM
Hello.
I see there are a few suppliers of pattern replica side panels.
Does anyone know which are the best?
My bike is a 750K1. It has a good pair of original panels.
But some Buffoon has filled the badge recess with filler & sprayed over them.
Sean.
Title: Re: Side panels
Post by: Nurse Julie on March 12, 2018, 08:59:56 PM
LPM Mouldings make the best pattern panels in my opinion. Far superior to the original.
http://lpmreplicaparts.com/
Title: Re: Side panels
Post by: Green1 on March 12, 2018, 09:01:16 PM
Agreed far better then originals 
Title: Re: Side panels
Post by: AshimotoK0 on March 13, 2018, 08:08:28 AM
Can't you try carefully Dremeling away the filler and use your originals?
Title: Re: Side panels
Post by: paul G on March 13, 2018, 08:14:02 AM
Can't you try carefully Dremeling away the filler and use your originals?
This and a bit of heat normally softens the filler.
Title: Re: Side panels
Post by: Arch stanton on March 13, 2018, 11:16:17 AM
Thank you for your speedy response. I was thinking of going the Dremel route.
But the IPM panels are so inexpensive especially as they are superior to the originals. I'd be a fool not to use IPM.
You guys are going to make this project Sooo much easier.
Thanks again.
Sean.
Title: Re: Side panels
Post by: Arch stanton on March 15, 2018, 08:48:28 PM
Good tip about LPM.
Bought a pair of panels this lunch time. The received a text 2 hours later. Saying my panels are in the post!
If their parts are as good as their service. I'll be well pleased.
Sean.
Title: Re: Side panels
Post by: Arch stanton on March 17, 2018, 12:03:18 AM
Got home today. To find my side panels waiting. Brilliant!
Sean.
SimplePortal 2.3.5 © 2008-2012, SimplePortal