This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Bradders
Pages: 1 ... 10 11 [12] 13 14 15
166
« on: May 24, 2019, 09:34:55 AM »
Thanks Julie. You’re a mine of information.
167
« on: May 24, 2019, 09:15:13 AM »
Hi Julie. When you say a traffic film remover would that be Gunk or similar?
168
« on: May 23, 2019, 08:33:21 PM »
Thanks Greg and Julie. To be fair It’s probably just general grime so will try the wash and WD40 method first. Thanks once again.
169
« on: May 23, 2019, 08:23:03 PM »
Evening all. Was going to wash my bike over the weekend and was wondering how to clean the engine cases. It’s sort of ingrained dirt/ oil on them. Was thinking autosol or will that scratch them?
170
« on: May 13, 2019, 09:49:33 AM »
Donation made. Thanks very much for all the advice.
171
« on: May 08, 2019, 11:38:45 AM »
Thanks Mike, that’s a good tip. Im not the most mechanically minded person in the world so tips like that help.
172
« on: May 08, 2019, 09:22:05 AM »
Sorry taysidedragon, I was confusing myself. I was looking on the bottom chain run and getting confused.
173
« on: May 07, 2019, 08:02:41 PM »
Thanks taysidedragon that’s how I had had it. This guy on YouTube had it the other way round.
174
« on: May 07, 2019, 07:13:24 PM »
Thanks for your replies. That’s very reassuring about the play in the sprocket. Thanks. I did check the links but I will do them again tomorrow and use hairygit’s method. Am I right in thinking the clip that joins the link should have the open end facing forward? Just watched a YouTube clip with the open end facing backward!
175
« on: May 07, 2019, 06:05:08 PM »
Evening all. Still have a clunking noise from the front sprocket area. Have taken the chain off to give it a good lube and then rotated the sprocket and the noise stopped. There seems to be a fair amount of play when I wiggle the sprocket. Is that normal?
176
« on: April 25, 2019, 09:01:16 AM »
Ah, Trigger now you’ve confused me. It’s been a long time since I rode bikes so not sure about the different chains. Do you know how long the bolts should be or where I can find out?
177
« on: April 24, 2019, 09:09:00 PM »
Evening. Checked the front and rear sprockets and all seemed fine ( to my untrained eye). Also gave the chain a good oil. Seems quite a bit better, maybe will completely stop the noise when the oil works it’s way in more. Anyway thanks for all your advice.
178
« on: April 22, 2019, 11:40:08 AM »
Have just oiled the chain and seems quite a bit better but will check the sprocket tonight. Thanks for your advice.
179
« on: April 22, 2019, 10:23:02 AM »
Thanks very much. Shall have a look when I get home from work tonight.
180
« on: April 22, 2019, 09:31:10 AM »
Thanks for your replies guys. Is the front sprocket easy to access so I can check? I’m not much of a mechanic!
Pages: 1 ... 10 11 [12] 13 14 15
|
Show Posts