46
CB350/400 / Re: Brake Pads
« on: October 09, 2017, 02:42:35 PM »
Yep! You need this! He is a nice guy, you can buy with or without a core.
Kind regards,
Emiel
Kind regards,
Emiel
Try our new info resource - "Aladdin's Cave" (Main menu)
Just added a separate link to Ash's Dropbox thread (shortcut)
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to. 46
CB350/400 / Re: Brake Pads« on: October 09, 2017, 02:42:35 PM »
Yep! You need this! He is a nice guy, you can buy with or without a core.
Kind regards, Emiel 47
CB350/400 / Re: Brake Pads« on: October 06, 2017, 01:33:27 PM »
Here a link for drilled disc..6 mm thick!
http://www.vinmoto.org/gallery/v/VinMoto-Garage/album03/Godfferys-Garage-123/Parts+and+service/Brake+Rotors+_+Thinned+and+Drilled/HONDA+Front+brake+rotors+CB+350K-350F-360-400F/ Kind regards, Emiel 48
CB350/400 / Re: Zinc replating« on: May 12, 2017, 08:59:38 AM »
Hi, degrease it and sandblast it, that's the best.
Kind regards, Emiel 49
CB350/400 / Re: Honda CB 400 four bearing codes« on: May 11, 2017, 07:54:44 AM »
Thanks Oddjob!
Do you also agree that the number in the picture on the conrod is a 2? Kind regards, Emiel 50
CB350/400 / Re: Honda CB 400 four bearing codes« on: May 10, 2017, 07:42:39 AM »
Thank Oddjob.
So buy the stuff and plug and play.... so no double check with Plastigauge? Kind regards, Emiel 51
CB350/400 / Honda CB 400 four bearing codes« on: May 09, 2017, 11:12:33 AM »
Dear All,
I know this subject passes a lot on the forum, but this is my first Honda CB 400 Four engine so I would like to double check the bearing info. My crankcase stamps outside are BBBBB My crank paint says: A1 A1 B1 B1 2 My conrods paint says: 1 2(bit blurry, see pic) 3 3 So my cranks bearing codes are: B1 B1 B1 B1 B2, so that is Green, Green, Green, Green and ? (Please advise color shell B2) Conrods will be: A1 A2 B3 B3, so that is ? Yellow ? ? Please advise color shell A1 and B3 Thanks a lot. Kind regards, Emiel 52
CB350/400 / Re: Honda CB 400 four Vesrah valves« on: March 17, 2017, 06:47:38 AM »
Yes Rick did a great job! Carbs looks very nice, soon I hope to see the results on the dyno.
He also made me a new version of his quick turn throttle system, made from billet. Emiel 53
CB350/400 / Honda CB 400 four Vesrah valves« on: March 16, 2017, 11:53:08 AM »
Dear All, I have a question about inlet/exhaust valves for a Honda CB 400 four. The OEM Honda valves are not cheap, but proven quality. Now Vesrah is selling a valve set for around 145 euro, half the price of OEM. But are they good? Any one fitted these before?
Please advise. Or shall I go for stainless valves, plus 1mm? Specs of my bike: Big bore 466cc, WEBCAM stage2, bored Honda carbs (Rick Denoon), K&N pod filters and stainless 4 into 1 (Moto GP works) Kind regards, Emiel 54
CB350/400 / Re: 400f tank + side panels« on: February 02, 2017, 11:25:53 AM »
Dear All, who painted this set? Please advise.
|