Honda-SOHC

SOHC.co.uk Forums => CB750 => Topic started by: Green1 on September 28, 2013, 08:11:29 PM

Title: Throttle cables
Post by: Green1 on September 28, 2013, 08:11:29 PM
Finally got around to changing the sticky pattern made cables and can't believe the difference the throttle is much more responsive and sooo much lighter popped a wheelie pulling away at a junction  8) Also got the cruise control working what a faff trying to twiddle the knob  ???   
Title: Re: Throttle cables
Post by: hairygit on October 01, 2013, 12:19:14 PM
Just proves the point that you can't beat genuine parts for some items! Although I have noticed that Dave Silver Spares has started offering cables made by the original manufacturer that made them for Honda, but I haven't tried one yet, but theoretically should be every bit as good, for a better price ;D
Title: Re: Throttle cables
Post by: cb750stu on October 01, 2013, 01:41:28 PM
Hi sorry to hijack this thread but i was wondering if you had the correct routing for the 2 throttle cables do they both go through the hole in the centre of the frame or over the top ??

Cheers Stuart
Title: Re: Throttle cables
Post by: Green1 on October 01, 2013, 05:14:14 PM
Hi Stuart
Both cables go through the triangle and other the coils on the left hand side.I'll take a pic tomorrow if I remember

Mick
Title: Re: Throttle cables
Post by: cb750stu on October 02, 2013, 07:17:05 AM
Cheers Mick much appreciated !!!

Thanks
Title: Re: Throttle cables
Post by: hondaking on October 02, 2013, 04:36:26 PM
Bought Two cables from silvers and there fine
Title: Re: Throttle cables
Post by: Green1 on October 02, 2013, 04:55:06 PM
Here you go Stu striped the bike just for you
Title: Re: Throttle cables
Post by: Green1 on October 02, 2013, 04:58:25 PM
Bugger
Can't seem to ad pics tried repeatedly
Title: Re: Throttle cables
Post by: UK Pete on October 02, 2013, 08:08:23 PM
When i try to open the link it says file empty
pete
Title: Re: Throttle cables
Post by: Bitsa (Ralph Wright - RIP) on October 02, 2013, 08:30:45 PM
Plus one with me
Cheers
Bitsa
Title: Re: Throttle cables
Post by: Green1 on October 02, 2013, 08:36:57 PM
Am I the only one that can't load any pic whatsoever
Not even pics that have been loaded before
Title: Re: Throttle cables
Post by: mickwinf on October 02, 2013, 09:05:10 PM
having same trouble
Title: Re: Throttle cables
Post by: hairygit on October 03, 2013, 08:20:36 AM
Same here, been like it for ages, tried posting pics to the gallery and forum posts, fails every time so gave up trying! ???
Title: Re: Throttle cables
Post by: mick on October 03, 2013, 10:52:21 AM
Random picture of my F1 just wanted to see if posting pictures worked for me through photobucket  ;) cheers Mick.

(http://i234.photobucket.com/albums/ee75/mcpuffett/ribbleheadtoboltonabbey005-1.jpg) (http://s234.photobucket.com/user/mcpuffett/media/ribbleheadtoboltonabbey005-1.jpg.html)
Title: Re: Throttle cables
Post by: cb750stu on October 03, 2013, 12:49:58 PM
Just wondering what cables go where ??

Does the opening cable go closest to you on the handle bars and the closing frurthest away ?? And which one goes where on the carbs ??

Mick i noticed you are running pod filters on your F1 and a different exhaust any recommendations on needle position and jet sizes to go for ??

Cheers
Title: Re: Throttle cables
Post by: hairygit on October 03, 2013, 02:34:34 PM
Hi Stu, the opening cable goes to the front of the bars, and the closing to the rear ;D
Title: Re: Throttle cables
Post by: cb750stu on October 03, 2013, 03:35:20 PM
Cheers mate so i take it the opening cable end goes on the top of the carb and the closing at the front ??

Thanks
Title: Re: Throttle cables
Post by: hairygit on October 03, 2013, 05:33:44 PM
That's correct ;D
Title: Re: Throttle cables
Post by: cb750stu on October 03, 2013, 06:07:49 PM
Cheers mate job for tonight !!!
SimplePortal 2.3.5 © 2008-2012, SimplePortal