Honda-SOHC
SOHC.co.uk Forums => CB750 => Topic started by: El__burro on November 14, 2014, 06:39:32 PM
-
Hello, I am looking to purchase a dual/twin throttle control for my cb750.
Ideally I would go for a Tomaselli domino as I have this mounted on another bike and i find it ok. Unfortunately budget restrictions apply.
I have come across the Doherty 77 replica but it's so cheap that I am a bit hesitant.
Anyone has used this or have some feedback to share.
Thanks
El__burro
-
Are you talking of a twin cable push pull throttle or something else?
pete
-
Yes, that one.
-
i have one you can have for £5+ postage, it was on a honda 750 but its not original has a dent and needs cleaning and painting
(http://i924.photobucket.com/albums/ad90/UK-Pete/ebay%202014/throttle002_zps5df95352.jpg) (http://s924.photobucket.com/user/UK-Pete/media/ebay%202014/throttle002_zps5df95352.jpg.html)
(http://i924.photobucket.com/albums/ad90/UK-Pete/ebay%202014/throttle003_zpsda8fee9c.jpg) (http://s924.photobucket.com/user/UK-Pete/media/ebay%202014/throttle003_zpsda8fee9c.jpg.html)
-
Thanks for the offer but I have the same, just wanted to replace it with a twist grip only.
-
Don't know if they are the same but Doherty did make twist-grips for moto-x bikes years ago, they were fairly basic but also seemed quite tough and worked ok.
-
Just purchased a Doherty 77 replica.
I'll post an update once i have an idea.
-
Just to say that the Doherty type twin pull, (that i have) pulls both cable to the same direction, Infact I can only use with 1 cable. I'm not sure this should be the case.
El__burro
-
Presumably yours looks something like this, which is intended for use on twin carburettor machines with a separate cable for each carb.
[attachimg=1]
-
exactly!
-
For a push pull setup how about something like this:
https://www.venhill.co.uk/Controls,_Levers_&_Handlebars/MOTORCYCLE_CONTROLS/TWISTGRIPS/888_VENHILL_FAST_ACTION__PUSH-PULL_TWISTGRIP.html
or this (cheaper!):
http://www.caferacerwebshop.com/twin-push-pull-black-twistgrip-7-8-or-22mm-type-1.html
-
The VTR1000 twistgrip body will work with the standard grip, and give you what you need, plus its all Honda and will look factory.
http://www.ebay.co.uk/itm/Honda-VTR-1000-Firestorm-1998-throttle-tube-twist-grip-/281809688483?hash=item419d2a97a3:g:wsgAAOSw3ydV3Hps
-
Nice, the VTR one looks very nice, shame I didn't see it before. I'll think of it when/if i need to replace the Doherty type.
Thanks
El__burro
-
I'm thinking of buying one of these for mine anyone used before was thinking of the venhill 888 but at over hundreds pounds a little exspensive .these are half the price .
-
Talking of Throttle >>>take a look here, its Brilliant
https://www.youtube.com/watch?v=0sCbJCDHVpg
-
Thanks. Well done Valentino. I am sure he will try to do it his way.
-
at the end I've bought the VTR throttle
Not sure how long it would have lasted on one cable only.
R1_pete, thanks for the tip.
thanks
el__burro