Recent Posts

Pages: 1 2 [3] 4 5 ... 10
21
CB500/550 / Re: Rear brake hub anchor bar clip 94251-08000
« Last post by McCabe-Thiele (Ted) on May 10, 2024, 05:03:13 PM »
Thanks, interestingly the download parts book shows an R clip at the hub end & a split pin at the frame end!
22
CB500/550 / Re: Rear brake hub anchor bar clip 94251-08000
« Last post by Bryanj on May 10, 2024, 04:53:19 PM »
Those were originally split pins Ted but i think i fitted R clips, i have boxes of assorted ones
23
CB500/550 / Re: Rear brake hub anchor bar clip 94251-08000
« Last post by Bloggs on May 10, 2024, 04:52:19 PM »
Hi Ted,

These are known as 'R' pins.
Lots of vendors
Model Fixings do them in zinc plate  https://www.modelfixings.co.uk/r_clips.htm
Bolt World do them in STainless   https://boltworld.co.uk/product-category/fasteners/engineering-keys-and-pins/pins-clips/r-clips/?_gl=1*12jaxfs*_up*MQ..&gclid=EAIaIQobChMIo_PU6beDhgMVnqODBx22nA7lEAAYAiAAEgLXFfD_BwE

I have used both vendors and been happy with both.

Other vendors are out there....

Michael
24
SOHC Singles & Twins / Re: CB360 Wiring question
« Last post by Bryanj on May 10, 2024, 04:49:54 PM »
Brown wire goes to the small bulb in headlight in uk which is not fitted in us, unfortunately it is a requirement to have an "obgliatory" light in uk and would fail mot if not there plus if you got a knowlegable plod( both words in one sentence) it could be an offence.
Depending on light size there are plenty of units out there.

Green and red may be neutral switch to idiot light wire
25
SOHC Singles & Twins / Re: CB360 Wiring question
« Last post by Craizeehair on May 10, 2024, 04:45:06 PM »
Just had a real quick look before we get ready to go out and it seems as though these early bikes might not have had a clutch switch.

There’s also a brown wire and a green and red wire both free and not connected in the headlight bucket and after a really quick look at the wiring diagram I think these may not be connected to anything either, could be pains over if I’m lucky???

Will have a few hours to muddle through something tomorrow, thanks for all the input, much appreciated.
26
SOHC Singles & Twins / Re: CB360 Wiring question
« Last post by McCabe-Thiele (Ted) on May 10, 2024, 04:33:35 PM »
To fit them you just remove the lever & feed it in - it has a slot that slides into the lever bracket.

Mine fitted but I had to file the end pin down very slightly to get it to work properly.

The wiring colours were different but easy to see how it connected - only two wires!
27
SOHC Singles & Twins / CB360 Wiring question
« Last post by Craizeehair on May 10, 2024, 04:30:52 PM »
You know what Ted, that could make sense as there definitely wasn’t one when I dismantled the bike, has a brake switch that looks jut like that though.

Off to get the parts manual!
29
CB500/550 / Rear brake hub anchor bar clip 94251-08000
« Last post by McCabe-Thiele (Ted) on May 10, 2024, 04:25:04 PM »
I am after the above clip described as an 8 mm pin in the parts book ideally in stainless.

Can anyone tell me where I might be able to source a couple of these at sensible money?

In the short term I could use a split pin - I prefer to use the original style of clip - not sure what they are an called S pin?
30
SOHC Singles & Twins / Re: CB360 Wiring question
« Last post by Craizeehair on May 10, 2024, 04:23:05 PM »
red/green is the clutch lever switch.
light green /red is the neutral light wire
Thank you, I can’t see where to connect them but that’s now a problem for the weekend. I wasn’t ready for this to stump me but it has… well and truly!
Pages: 1 2 [3] 4 5 ... 10
SimplePortal 2.3.5 © 2008-2012, SimplePortal