Honda-SOHC
Other Stuff => Desperately Seeking!! => Topic started by: McCabe-Thiele (Ted) on July 27, 2023, 03:17:31 PM
-
Well today whist holding the clutch adjuster big screw part in my hand to prize off the old seal I managed to break off /damage the thin end of the wall where the seal sits.
I can't believe I was so clumsy - I should have set fire to it instead that would have worked - I had no idea how thin it is at the seal end.
Anyone have one to spare/sell?
Part number is 22841-266-000
-
Havent got a spare sorry Ted, i know Dave Silver does repo ones but they are £46
-
Havent got a spare sorry Ted, i know Dave Silver does repo ones but they are £46
And temporarily out of stock at DS - still beating myself up that I was so cack handed.
(https://live.staticflickr.com/65535/53075787993_9a5e6977ba_o.jpg) (https://flic.kr/p/2oS8hCZ)clutch adjuster screw (https://flic.kr/p/2oS8hCZ) by Macabe Thiele (https://www.flickr.com/photos/187487200@N03/), on Flickr
-
Not brilliant around adjuster slot but free if you want it. I could have a decent slot milled at work if you wish
-
Thanks for the offer Ash I'll send you a PM.
I've done a temporary repair using some JB weld - never used it before. I managed to put the broken part in place a couple of days ago. Put some extra JB weld on the inside then fitted the new seal without it snapping off.
-
Thanks everyone now sorted thanks to Ash.