This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - eem46
46
« on: October 09, 2017, 02:42:35 PM »
Yep! You need this! He is a nice guy, you can buy with or without a core.
Kind regards,
Emiel
47
« on: October 06, 2017, 01:33:27 PM »
48
« on: May 12, 2017, 08:59:38 AM »
Hi, degrease it and sandblast it, that's the best.
Kind regards,
Emiel
49
« on: May 11, 2017, 07:54:44 AM »
Thanks Oddjob!
Do you also agree that the number in the picture on the conrod is a 2?
Kind regards,
Emiel
50
« on: May 10, 2017, 07:42:39 AM »
Thank Oddjob.
So buy the stuff and plug and play.... so no double check with Plastigauge?
Kind regards,
Emiel
51
« on: May 09, 2017, 11:12:33 AM »
Dear All,
I know this subject passes a lot on the forum, but this is my first Honda CB 400 Four engine so I would like to double check the bearing info.
My crankcase stamps outside are BBBBB
My crank paint says: A1 A1 B1 B1 2
My conrods paint says: 1 2(bit blurry, see pic) 3 3
So my cranks bearing codes are: B1 B1 B1 B1 B2, so that is Green, Green, Green, Green and ? (Please advise color shell B2)
Conrods will be: A1 A2 B3 B3, so that is ? Yellow ? ? Please advise color shell A1 and B3
Thanks a lot.
Kind regards,
Emiel
52
« on: March 17, 2017, 06:47:38 AM »
Yes Rick did a great job! Carbs looks very nice, soon I hope to see the results on the dyno.
He also made me a new version of his quick turn throttle system, made from billet.
Emiel
53
« on: March 16, 2017, 11:53:08 AM »
Dear All, I have a question about inlet/exhaust valves for a Honda CB 400 four. The OEM Honda valves are not cheap, but proven quality. Now Vesrah is selling a valve set for around 145 euro, half the price of OEM. But are they good? Any one fitted these before?
Please advise. Or shall I go for stainless valves, plus 1mm?
Specs of my bike: Big bore 466cc, WEBCAM stage2, bored Honda carbs (Rick Denoon), K&N pod filters and stainless 4 into 1 (Moto GP works)
Kind regards,
Emiel
54
« on: February 02, 2017, 11:25:53 AM »
Dear All, who painted this set? Please advise.
|
Show Posts