Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mike the bike

Pages: 1 2 [3] 4 5 ... 171
31
CB350/400 / Re: Fitting the headgasket question again?
« on: October 14, 2021, 10:37:02 PM »
Don't bother with the Samaritans. It's all automated these days.
Press 1 if you're feeling suicidal
Press 2 if you've murdered your spouse
That kind of thing.
If you press 1, you get connected to an Arabic call centre who asks you if you can drive a truck or a light aircraft.

32
CB350/400 / Re: Where did you go this year?
« on: October 14, 2021, 10:29:33 PM »
I went on some good ride outs with the bike club but nothing major.  We didn't even have a holiday this year.  I caught up with some major DIY projects and I started a new career, repairing coffee machines, which involves a lot of training in Milton Keynes.  Last day in MK tomorrow

33
Tricks & Tips / Re: Magnetic solution..
« on: October 07, 2021, 06:27:12 PM »
I've got a gadget that magnetises screwdrivers.  Screws stay on the end, not the stainless ones though.

34
Tricks & Tips / Re: Chrome trim on CB350F, CB500F Etc Seat Covers.
« on: October 07, 2021, 06:24:34 PM »
I picked up a great tip for working with Araldite.  It's less messy and more controllable.
Use the side by side syringe type and squirt some in the corner of a plastic food bag.  Massage the bag to mix it up. Snip the corner off the bag, the size of the hole depending on what you want to repair.  Squeeze the mix out just like icing a cake.

35
Announcements / Re: Last Ride
« on: October 02, 2021, 10:38:44 PM »
I'm so sorry to hear about Hairy.  It's like losing one of the family.   After leaving over 2700 posts on the forum,  we've lost a good friend. 

36
Project Board / Re: 75 400 Project commences
« on: October 02, 2021, 10:31:17 PM »
It will be interesting to see the end result.

37
New Member Introductions / Re: Evening all
« on: September 30, 2021, 06:31:40 PM »
Hi Paul.  There's no pi55 taking on here, just helpful advice and banter.

38
Out & About / Re: Crich 2021
« on: September 26, 2021, 10:36:54 AM »
Got my entry.  How many other people are going?

39
CB500/550 / Re: KITTYS MAIDEN VOYAGE 😁😁😁😁
« on: September 24, 2021, 06:29:04 PM »
Are you riding it to Crich next week?

40
Out & About / Re: OUT AND ABOUT 2021
« on: August 12, 2021, 10:05:12 AM »
DKW stands for Dampf Kraft Wagen.  Dampf bring the German word for steam.  Just thought I'd share that.

41
Out & About / Re: OUT AND ABOUT 2021
« on: August 06, 2021, 08:32:14 AM »
I enjoyed the Miners Arms bike night.  I never heard of it until John texted me.  I rounded up some club members and we headed off along the A48 to Chepstow then up the side of the Severn.  We all agreed it was a great evening's ride.

42
Out & About / Re: OUT AND ABOUT 2021
« on: July 24, 2021, 01:49:42 PM »
I'm using 5 ohm coils.  Some people use 3 ohm or less and the system has excessive current consumption and overheating.

43
Out & About / Re: OUT AND ABOUT 2021
« on: July 23, 2021, 04:30:59 PM »
It's got a Dyna S system, no points, condensers etc.  Anyway, I rode it to work and back and it's OK.  Not sure yet whether it's fixed because it was an intermittent fault but so far, good

44
CB350/400 / Re: Help Needed
« on: July 22, 2021, 09:24:28 PM »
Is it charging?

45
The blind rivet doesn't hold a cover thing (escutcheon) in place, it just holds a thick washer over the skinny part of the lock.

Pages: 1 2 [3] 4 5 ... 171
SimplePortal 2.3.5 © 2008-2012, SimplePortal