61
Humour / Re: It's a biker thing
« on: April 16, 2021, 08:52:59 AM »
Has nobody noticed that 6th gear is missing?
Try our new info resource - "Aladdin's Cave" (Main menu)
Just added a separate link to Ash's Dropbox thread (shortcut)
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to. 61
Humour / Re: It's a biker thing« on: April 16, 2021, 08:52:59 AM »
Has nobody noticed that 6th gear is missing?
64
CB500/550 / Re: Seems like a bargain?« on: April 14, 2021, 08:07:30 PM »
It's a bit far to collect, I'll give it a miss.
65
Misc / Open / Re: VJMC Forum?« on: April 11, 2021, 06:46:34 PM »
I was a member for years, even got a photo of my bike in Tansha a couple of times. After our local group died, I didn't renew and have joined a local, more active club
66
Recommended Sources for Parts and Services / Re: Rub N Buff« on: April 03, 2021, 10:46:48 AM »
You know those chocolate brazils with the shiny chocolate coating? That's carnauba wax.
68
Misc / Open / Re: Soldering Iron Recommendations« on: April 01, 2021, 11:43:42 PM »
I don't like that new fangled unleaded stuff, it just doesn't flow properly.
69
CB350/400 / Re: Not sure what this is do I remove it?« on: March 30, 2021, 11:01:18 AM »
Don't remove it if you don't have to.
70
Recommended Sources for Parts and Services / Re: Rub N Buff« on: March 29, 2021, 09:28:13 AM »
I didn't have an old toothbrush so I used my lad's one. He now looks like Jaws in a James Bond film. He hasn't noticed yet though.
71
Recommended Sources for Parts and Services / Re: Rub N Buff« on: March 24, 2021, 07:08:41 PM »
Clicking on that link led to a seller that had sold out. There's 9 others though, so I bought one. I look forward to having a go.
72
Misc / Open / Re: The Covid Thread« on: March 19, 2021, 08:04:17 AM »
Had the first one but, having listened to advice, trying my best to avoid buses.
73
CB350/400 / Re: How do I hold this shaft to undo the end nut?« on: March 17, 2021, 08:23:58 PM »
Or use a piece of hardwood. It won't damage anything. I've done it that way for years
74
Misc / Open / Re: Gas fire gasket« on: March 11, 2021, 12:11:17 PM »
I had this boiler fitted back in 2005. At that time, I found it difficult to get someone to fit it because they're less efficient etc. I could have gone down the combi boiler route but I would have to have radically altered the plumbing, including binning the recently fitted hot water cylinder.
I got the washer sent out, the original asbestossey thing has been superceded by a copper washer. I'll fit it when I get around to it. |