Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: rosco on May 15, 2019, 09:59:38 PM

Title: machining
Post by: rosco on May 15, 2019, 09:59:38 PM

 Hi  Is there anybody on here that does rebores and head work  As will require this service on my 400/4  Ross

Title: Re: machining
Post by: Rob62 on May 15, 2019, 10:51:05 PM

You’re not too far from Castleford, there is a company there who have been around for decades and used to specialise in motorcycle engineering rebores etc... they do mostly auto engineering these days but will still do bike engineering. I have had bike rebores in the recent past. They are called Lockside engineering.
http://www.locksideengineering.com/ (http://www.locksideengineering.com/)

Title: Re: machining
Post by: Bryanj on May 15, 2019, 11:03:10 PM

I was negotiating for a boring bar but had a heart attack before we completed the deal. Was going to cost me 2 grand for a used bar in known good knick.

Title: Re: machining
Post by: rosco on May 15, 2019, 11:06:57 PM

Cheers Rob Castleford not far away so will give Dockside a look    Ross

Title: Re: machining
Post by: rosco on May 15, 2019, 11:08:19 PM

Sorry Lockside  B****y predictive  text