Honda-SOHC
SOHC.co.uk Forums => CB500/550 => Topic started by: sye on February 18, 2019, 04:47:04 PM
-
I was about to refit the coils when I discovered a load of breaks in the HT leads insulation. I have read loads of stuff on here about replacements. Some are good and other are crap, with a minimum primary resistance of 4.5 ohms. There are loads out there and most don't mention the resistance. Can some kind soul let me know where they bought theirs and know them to be good?
TIA.
-
What's the Ash mod? 😁
-
I was about to refit the coils when I discovered a load of breaks in the HT leads insulation. I have read loads of stuff on here about replacements. Some are good and other are crap, with a minimum primary resistance of 4.5 ohms. There are loads out there and most don't mention the resistance. Can some kind soul let me know where they bought theirs and know them to be good?
TIA.
I used the ones from Boyer electronics.
look well made,and perfect if you use their ignition,as I do
-
Mine has Boyer too. I will call them tomorrow and find out which ones to get, thanks. Just read Ash's refurb post and it's beyond me, so replacement is best.