This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - judodave
Pages: [1]
1
« on: March 13, 2013, 12:22:33 PM »
Just took my bike out today for an hours run and noticed white smoke coming from the exhaust pipe when I got back home. Has fresh petrol in and bike ran fine, opened it up to about 90mph , any thoughts.
2
« on: April 21, 2012, 01:56:04 PM »
Hi, just thought I would drop a line on the forum as I,m thinking of selling my CB650z and would prefer it to go an enthusiast here before I advertise it. I have spent a lot of time, effort and money but have only done 42 miles since the last MOT. ring me on 07901223627 if interested or email david.martin847@ntlworld.com. regards dave
3
« on: October 27, 2011, 10:20:44 PM »
Hi, have been using my recently restored cb650z regularly, but it is a pain to start when cold. This is the first old style bike I have owned so understand it wont be the same as my previous bike a fireblade. The engine and carbs have been rebuilt but on starting it seems to be fuel starvation and fires up eventually after many attempts. I have heard that this model from new was a terrible cold starter, which probably explains the premature starter clutch failure history. Its a shame that honda withdrew the kickstart on this bike,any tips on better starting would be greatly appreciated. regards dave.
4
« on: February 09, 2011, 08:32:48 PM »
Hi, I have a new clutch outer cover to put on my 650z and I know it has a gasket between the cover and engine. Would I need to put a sealant on the gasket or can it go on dry. regards Dave
5
« on: December 18, 2010, 02:09:28 PM »
Hi,
I've just managed to get an original grab rail for my CB650z but it looks like I need some inserts for the bolts that go through the rail and frame and into the mudguard.
If somebody has the same bike, could you let know what they look like as there seems to be a gap of at least an inch either side.
regards
Dave
6
« on: November 13, 2010, 07:12:04 PM »
Hi,
I've managed to get a replacement speedo for my cb650z but the mileage shown is a lot higher than what my previous one stated, is it possible to adjust the correct figure.
regards
Dave
7
« on: November 11, 2010, 04:42:14 PM »
Hi all,
I wonder if anybody can help me, I'm looking for a suitable black paint for a Cb650z. The bike is at present in a badly painted blue by the previous owner and I want to change it to black as it was originally. Does anybody know of a suitable paint code that may be similar?
Secondly I need to change the rotten motad exhaust and I have been looking at the Marshall deep tone and the two Marvin sets. Does anybody have any recommendations about which of these products would be a suitable or better replacement.
many thanks
Dave
8
« on: July 10, 2010, 05:58:43 PM »
hi there,
I wonder if someone can help me, I'm after the plastic cover that house's the indicator,high beam and ignition lamps which is located between the clocks. The previous owner of my bike drilled a hole in the existing one for an led lamp as some kind of cut out switch indicator.
I know the cb750F1 has one but not sure if its the same size so does the 400/4.
Any help would be appreciated if you know if the above bikes are the same for my part or where I might be able to source one.
regards
Dave
Pages: [1]
|
Show Posts