This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - Gilby50
Pages: [1]
1
« on: February 23, 2023, 04:40:49 PM »
Hi all,
I am looking for 8 useable exhaust collars for my 76 550f. My lockdown project came cobbled together with a short solid metal tube thing between the ex. head gasket and the clamp on each cylinder. These are rubbish so I am looking for some of the original bits to fix it.
Hopefully, someone in the UK will have some serviceable ones kicking around that they will sell me, postage will be paid of course.
cheers, Peter
2
« on: January 30, 2023, 10:14:50 AM »
Hi all,
I never stop being surprised at what people will do to save a bob or two. My 550 will never be perfect but it will be safe and will run right.
I have started rebuilding/restoring my spare set of carbs with new viton `o' rings etc to replace the ones on the bike which I know have some corrosion in the no 3 carb.
After removing the float chambers, I see 3 main jet retaining springs and the fourth jet is held in with something that looks like a blob of locktite or similar - what a bummer.
So, has anyone got a spare leaf spring about that I can purchase/obtain from them to put it back as it should be. Postage will be paid of course.
Many thanks,
Peter
3
« on: January 27, 2023, 03:53:23 PM »
Hi all,
I am looking for a 76 550f1 wiring harness box to tidy up the wires. part no. 32400-390-000. Does anyone have a spare/surplus one that they will sell me? cms don't have any nor anywhere else that I have looked.
I have a harness box for a 76 cb500t which I got with a donor bike which is obviously no use to me so if it is of use to anyone please let me know. part no. 32400-375-000
Cheers, Peter
4
« on: December 23, 2022, 02:42:58 PM »
Hi All, I have nearly finished my 3 year lockdown project to get a knackered 1976 550f1 rebuilt and back together. It will not look original (painted it white) but it will be a good safe bike to ride which is what I want.
I am having trouble locating some new or used rubber buffers that fit on the underneath of the seat pan. The oblong ones which fit at the front with a round cut out which sits on the left and right top frame tubes. Is there anyone out there who sells/makes these or has some for sale before I try and make some. The other round ones are also missing but I think I can source something similar which will do.
Anyone any ideas for locating these especially the oblong ones?
Many thanks, Peter.
5
« on: June 24, 2021, 12:59:19 PM »
Hi All, I have been putting together a 1976 550f over the past many months as a lockdown project. When I got the bike it was a bitsa of many parts (gs 650 wheels and forks etc) I am not one to get worried about everything being original but the end result has to be a safe and reliable bike for me.
Just got round to fitting the headlight shell/indicators/reflectors etc. Question! does it matter if the indicators fit through the shell and hold the thing on or do the reflectors do this job? personally I am not bothered which as people seem to do it either way. I have attached a pic of the `ears' with the shell fixed by the indicators but the threaded hole below on the ears is much bigger so what screws into this, neither of the pairs of original reflectors that I have will fit - same thread as the headlight shell nuts.
I have to say that this pair of ears did come on the bike BUT may not be the original Honda ones and may be from another bike altogether.
Next job will be the electrics. The original loom was butchered to death and I have still got it for spares if needed. I have a very good loom from a 76 cb500t (twin) Hoping this fits OK and will try and alter it if not. I am not good with electrics at all so will probably be asking many questions if youtube can't solve my problems.
Very grateful for any help/suggestions. Cheers, Peter.
6
« on: May 09, 2021, 04:13:09 PM »
Hi all. Thanks for having me on your site. Been a biker for over 50 years going thro a variety of Brit and Jap bikes. currently have a 1954 triumph 150cc terrier, a 2004 cbf250 as a daily ride and a 76 cb550f as a building project. Live in Ripon, North Yorks.
Pages: [1]
|
Show Posts