Honda-SOHC

SOHC.co.uk Forums => CB350/400 => Topic started by: Moorey on January 08, 2020, 08:45:25 PM

Title: 350 / 400 Float Bowl O rings
Post by: Moorey on January 08, 2020, 08:45:25 PM

Anyone know the o-ring size for the float bowls on the 350/400.  Ta.

Title: Re: 350 / 400 Float Bowl O rings
Post by: Moorey on January 12, 2020, 05:51:17 PM

Bump.

Title: Re: 350 / 400 Float Bowl O rings
Post by: Nurse Julie on January 12, 2020, 05:54:51 PM

No idea Chris.... I always buy mine direct from Gerben.

Title: Re: 350 / 400 Float Bowl O rings
Post by: awrawr on January 12, 2020, 10:10:39 PM

I have some in a packet with a label on it stating the size..... when I can find it. Watch this space...

Title: Re: 350 / 400 Float Bowl O rings
Post by: Moorey on January 12, 2020, 10:19:24 PM

Quote from: awrawr on January 12, 2020, 10:10:39 PM

I have some in a packet with a label on it stating the size..... when I can find it. Watch this space...

Cheers and welcome to the forum. :)

Title: Re: 350 / 400 Float Bowl O rings
Post by: H2Eric on January 13, 2020, 11:30:57 AM

I always use the shaped ones, which can usually be found on flea-bay.

Eric

Title: Re: 350 / 400 Float Bowl O rings
Post by: awrawr on January 13, 2020, 08:11:30 PM

Thank you. I've been on the US site for a while 'cos I couldn't find this one!

The bowl takes a 63mm x 2.0mm. A 2.5mm will fit but I think they're a touch too fat, stopping the faces from mating properly and risking warping the joint.

Title: Re: 350 / 400 Float Bowl O rings
Post by: Moorey on January 13, 2020, 10:38:22 PM

Thank you.