This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Topics - Pauarc
16
« on: July 31, 2023, 03:20:17 PM »
I have been reading up on the main carb jet for my bike they have been fitted with 120 When looking at info I think it should have 110 the carb are 657b all the plugs are on the rich side could this be the course.The float are set at 26mm slow jets 40 air screw 1and1/2 standard air filter HM341 exhaust Middle slot on needle
17
« on: July 18, 2023, 03:53:36 PM »
Has anybody put putoline s4 mineral oil 10w40 in their CB750k2 as bike seam to be noisy compared with motul 10w40 or is it me
18
« on: June 26, 2023, 05:35:17 PM »
With engine out Is it possible to split the gear box without removing the head so I can change the tensioner in the sump
19
« on: June 11, 2023, 10:02:58 AM »
Should you soak new clutch before you install them
20
« on: June 06, 2023, 04:36:50 PM »
Do clutch plates go hard and would this make them drag?
21
« on: June 02, 2023, 12:19:28 PM »
Could this top seal be giving a vacuum leak as it’s damaged
22
« on: May 25, 2023, 08:55:03 PM »
D8eA plugs seem to foul up has anyone run d7ea plugs which runs hotter
23
« on: May 18, 2023, 08:51:45 PM »
Need some help with which oil is best for my k2 mineral or synthetic book tell me mineral but shop are telling me synthetic
24
« on: May 11, 2023, 04:03:06 PM »
Has anyone got any information on the clutch mod (drill holes)
25
« on: May 05, 2023, 09:03:04 AM »
Trying to find out if the engine in my CB750k2 has had a later engine fitted Engine no is cb750e 2382187
26
« on: May 01, 2023, 10:08:02 AM »
Any help can you do the clutch without draining the oil
27
« on: April 30, 2023, 08:31:20 PM »
Are there any members on this Honda sohc site live in the witham area be great to chat
28
« on: January 18, 2023, 02:17:06 PM »
Ntw11j Honda cb250k0 where’s my bike
29
« on: July 31, 2022, 09:47:34 AM »
Has anyone used sea foam petrol treatment
30
« on: July 21, 2022, 09:20:58 PM »
I have now finished my Honda CB750K2 twin disc today
|