Recent Posts

Pages: [1] 2 3 ... 10
1
CB500/550 / Re: Rocker Housing - Stuck??
« Last post by McCabe-Thiele (Ted) on Today at 09:09:02 PM »
Mine was fairly solid, might be worth tapping it back down where it is sligjhtly raised. I found my big rubber mallet worked making sure I  tapped it all round including some upper blows on the intake side.
2
CB500/550 / Re: Plugs fouling at idle
« Last post by McCabe-Thiele (Ted) on Today at 09:03:47 PM »
I'll put it out there, plug fouling can also be caused by oil burning.
Worn rings or valve stem seals/ guide wear.
3
Project Board / Re: Doms CB550F1 project
« Last post by Laverdaroo on Today at 08:31:25 PM »
Posted today Dom, I’ll have a look for those deets mate, haven’t forgotten…………just side tracked…


Sent from my iPhone using Tapatalk
4
Other Bikes / Re: BMW R80
« Last post by davidcumbria on Today at 08:15:28 PM »
Thanks Fellahs those are very interesting and helpful replies. I will start reading up on classic bike etc and could be interested in those tools Ian. Impressive that you have the skills and kit to make them. Nothing happening very soon on this but great to know you guys have got my back 👍
5
Project Board / Re: Doms CB550F1 project
« Last post by SteveD CB500K0 on Today at 08:00:24 PM »
Quote from: McCabe-Thiele (Ted) on Today at 03:11:56 PM
I've noticed quite a few Websites where phone numbers, actual postal address are missing as well as a lack of e-mail address.
Some that have them keep them well hidden it seems with lots of navigation needed.

Companies Act 2006.

If you are a limited company in the UK you must put (at least) your registered address on your website.


Sent from my iPhone using Tapatalk
6
CB350/400 / Re: Yoshimura 466 kit on EBAY UK
« Last post by SteveD CB500K0 on Today at 07:57:01 PM »
Only if someone complains Andy.

There’s nothing stopping people selling stuff on here.

If members find it useful then good…


Sent from my iPhone using Tapatalk
7
CB500/550 / Re: Rocker Housing - Stuck??
« Last post by Mike_Berkshire on Today at 07:49:07 PM »
Im assuming that the dowels are designed to be retained in the head and not in the rocker housing? Giving the top end of the dowel a few taps with a blunt punch might hep free off some of the corrosion?
8
CB500/550 / Re: Rocker Housing - Stuck??
« Last post by Mike_Berkshire on Today at 07:15:49 PM »
Quote from: Nurse Julie on Today at 06:50:57 PM
2 solid dowels there, you can see the top of them, soak with penetrating oil and leave it with overnight. If still stuck, gentle diffused heat will help. Don't forget to remove the all the tappets before trying to remove the rocker cover.
Thanks Julie. I will douse them in penetrating oil and leave overnight as suggested. Its probably a good idea to put the bolts back in to keep the castings flush? I will see how things are tomorrow morning.
9
Other Bikes / Re: BMW R80
« Last post by Orcade-Ian on Today at 06:56:23 PM »
Another page on the site that I'd forgotten I had posted - am I getting old?

http://www.stallard-engineering.co.uk/stories/Bikes/European/BMW%20R100RT%20Part%202.htm

Ian
10
CB500/550 / Re: Rocker Housing - Stuck??
« Last post by Nurse Julie on Today at 06:50:57 PM »
2 solid dowels there, you can see the top of them, soak with penetrating oil and leave it with overnight. If still stuck, gentle diffused heat will help. Don't forget to remove the all the tappets before trying to remove the rocker cover.

[ Guests cannot view attachments ]
Pages: [1] 2 3 ... 10
SimplePortal 2.3.5 © 2008-2012, SimplePortal